I am not sure I understand the cutting angle diagram.
Printable View
I am not sure I understand the cutting angle diagram.
I am not sure which side to strop with first. What paste would you recommend using for my razor which is practically new? .5 is what i was thinking but am not sure
0.5µ is a finisher so you'll likely need to start with something coarser. I'll let the paste gurus give you more specific advice.
As for the cutting angle; essentially you lead each stroke with the tip ahead of the heel rather than a straight push with the whole edge moving ahead in perfect unison. Helps when you cut a tomato and it helps when you're shaving too. I also find that the easier cuttin action means I can use less pressure and actually geta safer shave with less nicks.
X
I am assuming the razor was in the kit from Tony - in which case it is almost certainly ready honed - but if it is not, does this not sound like a brand new, unhoned blade?
Experts?
If my blade is esencially sharp but needs a touch up I start with .5 and finsih with .25. If it is a bit duller I start with either 3 or 1 depending on how dull. If very dull I go to my Norton first then paddle.
Just my 2c....
Your blade should be a little dull....start with the coarser paste...i guess it is 3, then .5 and then .25
Bigger the number coarser the paste.....
Do at least 50 passes in each side.....you should not make any force to push the razor down....you will feel like you are spending your time and nothing will happen because you are not pushing the blade against the leather.....
Test it before shaving with it.....
I don't do it that many times myself. I only do like 20 or so.