What to mix with powder to make a good paste?

I have read the sticky on pasting a strop, but it is from 2008. Just wondering if a few people have come up with a different, or better solution?

I received some paste, and powdered Cr2O, and Fe2O3 recently.

The pasted Cr2O is 0.5 micron, the powdered is 0.3 micron, and I want to make some good long lasting paste with the smaller 0.3 Cr2O to apply to a cotton strop.

I have plenty of mineral oil, I use for my cutting boards, but wasn’t sure if it was the best thing to use.

As always, help, and suggestions are always appreciated.

Been using mineral oil for years, works great and is what was recommended to me when I first started shaving with a straight razor.

A couple drops of Mineral, Neetsfoot or Ballistol.

You don’t need much.

Add the powder to the oil.

For powdered CrOx pigment I mix it with Isopropyl alcohol and apply it with a spray bottle, works great, I imagine one could use this method w/any powdered sub-micron abrasive.

In the mail today :D

Attachment 323162

That should get you through the next couple of days.

while we are on the topic of pastes, How often does it need to be re applied? I am currently using some of the Dovo red and black paste on a loom style strop.

I use Plain Jane hand cream, I only use pastes on Leather so it made sense to me

Pea sized amount of Powder to a Almond sized amount of cream is more than enough for a strop..

I have narrowed down my use of pastes to the most pure versions of CrOx and CeOx both of which are pretty useless for refreshing an edge

It knida depends on what you are after for a result I would guess