Your are not gonna put very much force on it so you don't need to be the best of the best. But I personally wouldn't use something I don't really trust. Better to do it well and once.
Printable View
Just an FYI,do not use plain old yellow wood glue,it is water based and will soak into the leather.
Spray or brush on contact cement is just about dry when you adhiese the leather to the wood.
This is my Paddle,back in the day when I got fanatical about pastes and sprays, i would change out the leather every couple weeks.
Thank gawd I grew out of using that crap:)
Is now just a travel paddle.
http://i22.photobucket.com/albums/b3.../coppaddel.jpg
You are just gluing leather to wood, not bonding re-entry tiles to the space shuttle. Almost any glue would work, you don’t need much.
Water base glue will not affect the leather, firstly you are not introducing enough moisture and any moisture will dry. Does it really matter if the leather is dampened with alcohol or water?
Saddles have been made for years with hide glue, a water base glue as were vintage paddle strops, antique furniture veneers and joints.
I am always amused that people are so afraid of getting leather wet and reminded of the Sinefield joke about the cows pounding on the rancher’s door, “Hey lets us in, it’s raining out here and we’re wearing LEATHER.”
I just find it better to use Contact cement,like shoemakers do.Spray or brush it on,let it get tacky,postion the leather and stick it on,Done.
No clamping needed,no squeezout to trim,down the road if you want to swap out the leather,pull it off and repeat:)
Nice leather cutter pixel!
And those white inlays on your paddle, nice touches. I swear by contact cement and Loctite spray adhesives for leather and felt bonding.
Cheers.
I used leather glue and it has held up for quite a while. If you cut your own paddle leather from a hide after it is firmly glued to the paddle be sure and smooth the leather with a pumice stone.