Results 1 to 6 of 6
Like Tree10Likes
  • 2 Post By JellyJar
  • 1 Post By RayClem
  • 2 Post By tintin
  • 1 Post By Kees
  • 2 Post By DoughBoy68
  • 2 Post By drmoss_ca

Thread: Making a paddle strop

  1. #1
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default Making a paddle strop

    I made my first paddle strop from some canvas I got at a fabric store, a nice thick piece of cowhide from a local saddle maker and a broken pizza peel. It's not the prettiest, but it's functional. I wasn't worried about looks since I figured I'd nick it a few times (OK it was more than a few times). The nicks sanded out and it still works fine. Its been a while since I last nicked it, so I'm looking to make a nicer one. I also want to try a different fabric/leather combo.

    So far I've gotten a piece of hemp with a herringbone pattern (https://www.rawganique.com/hemp-webbing-p/web-ft.htm) and selected a piece of oak for the handle. I've been breaking the hemp in by soaking in water, pounding the edges with a meat mallet, and shoe-shining it over a smooth chromed 1" bar. It's getting fairly soft and the edge seams are flattening out. What is a good way of dealing with the cut ends to keep them from fraying?

    I've been looking for veg tanned horse hide, and have only found one source. https://maverickleathercompany.com/p...s-seconds-9oz/ These pieces are seconds and have a few dents and scratches. They are large enough that I may find a clean section to cut out for the strop. If I can't find a clean section, will the dents have a negative effect on the edge? I suspect it won't, but I don't have much experience with strops and would rather ask the question before mucking things up through ignorance. Does anyone have a source of clean horse hide suitable for a paddle strop?

    I also came across some pre-cut 11x3 roo pieces at Chef's Knives to Go, but they are also seconds with some blemishes. If the blemishes won't effect the performance, I may go with the roo, since it's a bit cheaper and I won't have left over pieces.

    Thanks in advance for any advice.
    rolodave and joelkerr like this.
    O'Toole's commentary on Murphy's Law: Murphy was an optimist.

  2. #2
    Senior Member
    Join Date
    Nov 2016
    Location
    Chicago Suburbs
    Posts
    1,091
    Thanked: 292

    Default

    Local hobby stores such as Hobby Lobby and Mitchell's carry leather. I have bought 8 1/2 x 11 sheets of vegetable tanned cowhide sold as tooling leather. These sheets will nearly flawless. They also sell trim leather that can also be used. It just depends on the type of leather you want to use.
    rolodave likes this.

  3. #3
    Senior Member blabbermouth tintin's Avatar
    Join Date
    Jun 2013
    Location
    archbold ohio
    Posts
    2,363
    Thanked: 545

    Default

    I treated the end of my linen strop with super glue to keep it from fraying.
    rolodave and JellyJar like this.

  4. #4
    Senior Member blabbermouth Kees's Avatar
    Join Date
    Jun 2006
    Location
    The Netherlands
    Posts
    5,474
    Thanked: 656

    Default

    There is a couple of vendors here that may be willing to sell you the hide you want.
    JellyJar likes this.
    Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.

  5. #5
    Senior Member DoughBoy68's Avatar
    Join Date
    Sep 2008
    Location
    Crossville, TN
    Posts
    1,711
    Thanked: 304
    rolodave and JellyJar like this.
    "If You Knew Half of What I Forgot You Would Be An Idiot" - by DoughBoy68

  6. #6
    Member
    Join Date
    May 2005
    Posts
    83
    Thanked: 45

    Default

    When I first discovered pastes, I bought soft blocks of balsa from a model shop and glued them to wooden backs - they did OK, but eventually I bought the wide TI double-sided paddles for pastes. For a plain strop I still prefer to have a hanging strop, but I have had a couple of paddles that I've used for travel (a narrow TI in a nice scabbard and the SRD paddle). I'm pretty sure that for a paddle strop the quality of the leather is less important than with a hanging strop; the fact it has a solid backing means that softness and elasticity - that determine the catenary of a hanging strop - just aren't factors.
    rolodave and JellyJar like this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •