Q re Applying Diamond Spray to Wool Felt Strop

Received SRD's wool felt strop and 0.5 diamond spray in the mail today. The instructions say to spray it twice and let it sit over night.

There's no indication how closely I should hold the spray bottle to the strop, however.

Will those who've applied it with good results tell me how closely you held the bottle to the strop?

Also, I saw a post from Lynn saying he did 3 passes when spraying. Can the experienced/successful users tell me how many passes you did?

p.s.

I did not expect that the wool would have a "grain to it." Move your hand upward, and there seems relatively smooth. Move down, and there is noticeably more friction.

I think I spray from about 8 inches or so and move the spray pattern down the length of the strop until it is uniformly covered, but not damp. The felt will swell a bit if you get it too saturated, so be careful not to spot it or spray too much in one area. Just go with a couple of light coats separated by drying time. Use three if you feel that you didn't get good coverage. The SRD spray has a pretty high density of diamond abrasive in the emulsion, so it doesn't take too much to make it work.

I have resprayed mine a couple of times, more because I just felt like it than due to any drop off in performance.

Okay, did it.

Hi,

+1 on Bills' comments.

I applied the spray to a felt paddle too generously, and it swelled up in the middle.

I didn't notice this, but my blades did :(

Re-pressing the felt after it dried seems to have worked !

Have fun !

regards

Russ

+1.

Dont apply so much it saturates the material. The spray is pretty abrasive, and less is definately better than more...!

I applied the spray too thick the first time, and it gave the strop a terrible rash, I could not press it down, but soaking it in warm water and letting it dry overnight hanging brought it back to new condition.

Crom

[QUOTE] FROM BASSET:
I did not expect that the wool would have a "grain to it." Move your hand upward, and there seems relatively smooth. Move down, and there is noticeably more friction. [QUOTE]
___________________________
___________________


Would someone like to comment on the wool felt grain issue? How is the strop manufactured and does the grain affect the razor edge in any way? Inquiring minds want to know.........Thanks

Quote:

---

Originally Posted by Bill S

I think I spray from about 8 inches or so and move the spray pattern down the length of the strop until it is uniformly covered, but not damp. The felt will swell a bit if you get it too saturated, so be careful not to spot it or spray too much in one area. Just go with a couple of light coats separated by drying time. Use three if you feel that you didn't get good coverage. The SRD spray has a pretty high density of diamond abrasive in the emulsion, so it doesn't take too much to make it work.

I have resprayed mine a couple of times, more because I just felt like it than due to any drop off in performance.

---

You can also run and edge up and down the felt to freshen it up and get more life out of it before you need to re spray

Quote:

---

Originally Posted by Don

You can also run and edge up and down the felt to freshen it up and get more life out of it before you need to re spray

---

But....I like to re spray.....:)

I took mine out on the porch. Held it vertical and sprayed from about 8 to 10 inches. Moving around and trying to get it evenly. Laid it down on the table out on the porch and left it to dry overnight. May have given it another lick.... really don't remember. Maybe 3 months later did it again. Hasn't needed it since but I don't use it alot. It is turning black so I guess I use it enough. :) Mighty effective when I do use it and I highly recommend it. :tu

I also over applied the .5 spray on my first piece of wool felt. My second piece did much better with just a few sprays. I wonder if Lynn expected this and is a factor in why there are two felts included with the modular paddle strop (in addition to having two treated with two different pastes). My question is, What do you mean by "press it down"? I will be soaking mine and drying it as I very heavily applied the spray, and experienced a toad skin like bumping across the whole surface.

ThreeSGuy,

I covered my felt strop with a peice of cotton cloth, then had it with a steam iron. After the ironing, I placed it face down on a smooth surface, evenly weighted the back of the strop and left it for two weeks to dry. It was fine after that :)

Have fun !

Best regards

Russ

[QUOTE=mrsell63;524280][QUOTE] FROM BASSET:
I did not expect that the wool would have a "grain to it." Move your hand upward, and there seems relatively smooth. Move down, and there is noticeably more friction.

Quote:

---

___________________________
___________________


Would someone like to comment on the wool felt grain issue? How is the strop manufactured and does the grain affect the razor edge in any way? Inquiring minds want to know.........Thanks

---

When I first got it, I noticed the same thing. Try to alternate on directions, however, with time and use, I have not notice any difference on the quality of the edge, using without alternating. Double O