Printable View
The straight razor that I inherited has chipped. And I need to know if it can be fixed and made functional. This is a C-MON razor.
I simply thought I could use it to cut a piece of plastic real quick.......and then suddenly, in a single move, chips just flaked from a spot.
Now I need the truth...no punches pulled, no words minced....can this be fixed and made fully functional?
here are photos
Hey there - did you intend to use that as a plastic cutter or a shaver? Needless to say trying to cut something other than whiskers can quickly destroy a razor.
Just looking at your pictures, you could get that honed and basically you'd lose up to the depth of the chip. Not sure what grind it is and if you'd be getting into a bellied area or anything... More experience will chime in.
Yes it can be fixed. You will lose the full depth of your chips all the way across the edge. Hook up with one of our restorer/honers and get your razor in the mail.
Remember straight razors are only for shaving, that is to say only for shaving! :w
it'll buff out, if not cracked no major problem I don't think
put it in the leasons learnt bucket and carry on LOL
well who told you to do that in the first place?Quote:
Originally Posted by Mach7
Quick or slow, don't cut plastic with the razor when you get it back from being repaired
First off go SLAP yourself for using this to cut a piece of plastic.... :nono:Quote:
Originally Posted by Mach7
Secondly you are pretty luck from what I see it is an easy fix for someone to hone it out.
Third DO NOT take it to the grinder and try to do it yourself... ;)
Forth...Send it out to one of the guys that restore or offer sharpening services here: Member Services - Straight Razor Place Classifieds
The first sentence had me in tears.Quote:
Originally Posted by Chevhead
Oh my! Nothing else need be said. I'm sure you've learned your lesson.
Mike
Its been a few weeks since I've been on here. But I appreciate all the advice. I am sending my razor to the great Lynn Abrams to be repaired. And I will be a lot more careful with it.
I was still using it...even with the chips in the blade. And all I had to use for a strop was a old , but blank, Tandy leathercraft belt.
But today I ordered a, you know,...... actual leather strop for straight razors. I cant wait to get it.
Plus I have watched some of Lynns DVD, which is excellent to say the least.
May we all learn from this!!! Cutting tape at the toe of a razor with another razor while honing cost me a millimeter of blade width once't.
~Richard
I took a couple of tiny chips out of an otherwise good blade yesterday with a rotary plastic brush on my dremel. I just have to remember not to hold it like that again. Metal cleaning (abrasive) polish and plastic brush on the dremel does polish well, without the heat build up of my buffer.
Ah, once again the dremel strikes. The natural enemy of the straight razor.Quote:
Originally Posted by Robbied
Yes indeed. I can deal with a couple of 1mm deep chips better than shattering a whole blade, as I know some have done .Quote:
Originally Posted by Maladroit
It may look possible and you might be tempted to use your razor for something other than shaving but......
Attachment 185055
Don't Do It !
Wow, the responses have been pretty restrained, usually it is SWAMBO who uses our razors for slicing of inappropriate materials.
Should be able to get it back in order by the looks of it.
Lynns dvd is excellent! You are lucky my friend that it didn't turn out any worse!!!!Quote:
Originally Posted by Mach7
It's ok to use a Dremel but you have to be very careful & let the tool spin away from the edge. I'm sure you know this.That and go lengthwise with it spinning away from the toe. I polish my blades with a Dremel & it works great with Maas.Quote:
Originally Posted by Robbied
Oh Happy DAY!!!!!!
I just received my very first straight razor supplies from Straight Razor Designs! I went cheap, but I am very happy with what I got. I got the Proraso soap, just on the looks of the package. Some things you can tell will be good on sight alone.
I bought an Omega synthetic bristle brush, which looked small in the ad, but when I received it it was larger than I thought. I am happy with that.
Then on name recognition alone I decided to get the Jeris aftershave. But not the name recognition that you would think.
I went to college with a kid named Jeris. We were both part of a early entry program that sent us to college only a few weeks after high school graduation. Kids that goofed off in high school or did just enough to pass were placed in these early entry programs.
But anyway this Jeris sold me a outfit at the end of the summer, for I think 50 dollars. Then we were playing Tecmo Bowl on the NES, and he gave me a chance to gamble the balance due for the clothes. I took the bet, but lost as he scored the winning TD using Walter Payton.
Things happened and he ended up not getting paid. I transferred from the university, but then re enrolled the next year. So I return to the university thinking all balances were cleared, but that was not so with Jeris, who demanded his 100$.
A fist fight ensued between us over the matter, ending in more or less a draw. But even Jeris acknowledged my good fight as I was able to place him in a hold from which he could not escape.
And this was back before the whole MMA thing took off. Only UFC 2 had taken place, with the legendary Royce Gracie revolutionist fighting in general.
Now Jeris was a football player for the university, a running back, no less, so this was not a small feat. Although the fight did take place after him seeing me in front of a dorm after practice. And he blamed the way the fight ended on the fact that he had just finished practice.
Anyway when I saw the bottle named Jeris I immediately bought it. At the end of the day Jeris was cool. So it was not a bad memory.
Attachment 185261
