15 Attachment(s)
CA & Soda: Bone Scale Repair
I repaired a set of bone scales the other day, and figured I better take pics of my progress.
Hopefully I can explain as well.
Someone here on the forum had posted a video awhile back on using CA and baking soda to repair the fwd. bridge on a guitar, so I gave it a go on the bone scales I had that were needing help.
Razor in question is a Oxford.
Here are pics of the scales after removal and a cleaning in diluted muratic acid (to remove as much rust as possible) wich softened the scales slightly as well.
I then clamped them and let them dry completely, before the actual repair. Only one scale of the set needed repair.
Wedge end.
Attachment 226097[ATTACH]226098[/ATTACHAttachment 226101Attachment 226102
Pivot end
Attachment 226103Attachment 226104
The how to
Attachment 226105
I placed a piece of wax paper down on my work bench (Something flat) so to remove scales after glueing . first will be the dished out area of the wedge end.
I placed more than enough soda on the repair area, and using a razor blade I lightly scraped the excess soda off the scale untill leveled.
Then a couple drops of thin, slow drying CA, and allowed it to soak into the soda, then a spritz of accelerator to instantly cure.
Attachment 226114Attachment 226115Attachment 226116Attachment 226117
Then sanded it flat with 220 sand paper, the layed the flat side down on the waxed paper, and pushed soda around the end, so to reshape and match the length of the other scale.
Attachment 226118[ATTACH]226119[/ATTACH
Placed pins through scales to hold them from moving.
Attachment 226120Attachment 226121
And sanded to match other scale