Chrome plating coming off? On a Sheffield?

This experience is a first for me. Its a 10 dollar ebay razor. Very poor pictures in the ad, bought it anyway because I've received some pretty nice razors with bad pictures before. Stamped on the side in the usual place is, "extra hollow ground sheffield". It definitely has the shiniest appearance of any straight razor I have bought. Here's the thing, it's chrome plated. It's rusting in a couple of areas where I'm able to actually scrape the rust off with the chrome plating. Also strange are the scales, never seen anything like them either, its like there a plastic cardboard, very strange yes. I'll post some pictures up shortly. I want to get your guys thoughts on what this is? Fake?
https://s27.postimg.org/fv8xpn483/20170128_144637.jpg
https://s27.postimg.org/kv6dxl9ur/20170128_144655.jpg
https://s27.postimg.org/xb33rc36r/20170128_144723.jpg
https://s27.postimg.org/q99rivoyr/20170128_144728.jpg
https://s27.postimg.org/acazm5wkj/20170128_144735.jpg
https://s27.postimg.org/st5eczcir/20170128_144741.jpg
https://s27.postimg.org/m3yuwyr6r/20170128_144805.jpg

It looks well ground, i suppose someone could have chrome plated an old razor, but seems silly to go through the effort. Is there any crome plating on the tang that you can tell? If it was cheap, I would probably take it off as best I could over time and see what was underneath....

The pinning does look amateurish

Yea, it's chrome plated all the way. Shiny like a mirror, never seen this in a razor before. I would probably leave the plating on. The last picture you can see where I've scraped away the rust spots that were growing underneath the chrome plating. No other writing on the razor.

I have only seen two Chromed razors

They were Advertising razors, one also had the Pressed cardboard scales

Basically they were given out as Feebies at events, BUT normally they have an Ad on there so your is a bit odd

The ones I saw one was for an Election, and the other was for a Store opening...

Just a thought, Hope it helps

Hmmmm, interesting. Thank you for that. I'm going to see if it will take an edge and be shave worthy... The steel underneath the plating seems like a strong carbon type.

I've seen 2-3 plated razors as well. I can't remember the brands but they did take an edge if I remember correctly

I have a Sears Roebuck that says " Chromized". Don't know if it is plated but it is very shiny.

Well, sure enough, it took a bevel and then subsequent edge, for shaving. Metal feels strange though, maybe a tad soft? Cut pretty quickly on my king 1k which I usually don't even use anymore due to its slow speed.

I've seen several razors that were plated and I've still got a few of them. I've seen both chrome and what I believe was nickel. I also have a razor with the same markings as this one. These are generic razors that were most likely not made in Sheffield England. This looks to be a 20th century blade that would have been stamped with "England" if it were actually made there. I'll post a few pics of my plated blades when I get home.

Try the 1k with slurry it will REALLY speed it up

Quote:

---

Originally Posted by Aerdvaark

Well, sure enough, it took a bevel and then subsequent edge, for shaving. Metal feels strange though, maybe a tad soft? Cut pretty quickly on my king 1k which I usually don't even use anymore due to its slow speed.

---

Your right! I forgot about that trick with the king.
Thank you!!

Quote:

---

Originally Posted by BeJay

I've seen several razors that were plated and I've still got a few of them. I've seen both chrome and what I believe was nickel. I also have a razor with the same markings as this one. These are generic razors that were most likely not made in Sheffield England. This looks to be a 20th century blade that would have been stamped with "England" if it were actually made there. I'll post a few pics of my plated blades when I get home.

---

It's crooked as hell but it has a shaving edge on it now, after some squabbling I might add from the unwilling subject. I'm glad to see there are other specimens like mine in existence. Indeed, mine has no markings of a preferred providence I'm sorry to say. Is it comfortable for me to presume they were born in Asia, Pakistan??

I have seen several razors that were plated and I have a few in my collection. I'm not sure if it was done to help with corrosion prevention or increase the brightness of the blade without all the polishing. Clauss, Genco/Geneva are the 3 most common US manufactures I have found. Once the corrosion begins the finish starts to blister and lift. My guess is it fell out of favor in just a few years. I have never encountered a Sheffield blade that was plated but don't doubt they are out there.

Looks like ShePPield, to me…

That's what I thought too, their just hooked F's...