This was so handy today, I needed to re-stock on Micro's and was at work :( With this thread here, I didn't even have to think about of the sizes....:thinking: Alex was thoughtful enough to even include that info right here in the thread....:D
Printable View
This was so handy today, I needed to re-stock on Micro's and was at work :( With this thread here, I didn't even have to think about of the sizes....:thinking: Alex was thoughtful enough to even include that info right here in the thread....:D
I haven't read every post here so forgive me if I am redundantly asking a question again. I have used cutlers rivets when re-handling knives. A cutlers rivet is a male and female pair that have identical heads and establish a press fit when assembled from either side of the knife handle. I have also seen screws that have the same head but one is a female, sort of a threaded sleeve with a slotted head that matches the male screw. Do we know of a source for stainless or nickel silver devices like these in 0-80 or smaller?
Is there a stainless equivilant to the adjustable set up? This set up seems to be brass and I can't seem to find the stainless equvilant and am wondering if the same things exist or if there's a reason it's only brass?
Thanks,
Matt
It appears that microfasteners now have the nut drivers listed on their website.
At least I hope it's the right one because I ordered 2 of them last night.;)
Availability aside.. Is stainless ok? I've been sticking with brass but I'm just curious, are there metals to avoid? (copper is a given).