Printable View
I was given a low level Dovo from a friend. It is in good shape but it is just starting to get some rust on the blade. What is the best way to get rid of the rust with taking on a major multigrit sanding job? Also, the blade does not fit correctly in the scales--If I am not careful when closing the razor the blade will hit the scales. Is there a way to correct the problem without re-scaling the razor? Sorry if the questions are a bit elementary (I am a bit of a newbie). Thanks- Charlie
As far as the rust goes it should clean up with an oily rag, unless its gone farther tan tat. If it has your going to have to sand. AS for the blade hitting the scales, is it due to warped scales, warped blade, or a loose pin.
If the rust is a bit tougher than an oily rag, try one of those scourer pads you can get for cleaning pots and dishes - I've had a bit of success with one of those and a bit of WD40.
James.
Try scrunching up some tin-foil and rubbing it against the rust.
Seriously!
Tin-foil? Scrunched up? Man, that's crazy talk! Quit talking crazy, Graham!Quote:
Originally Posted by poona
(Might just have to try that next time - thanks mate.)
James.
The tin foil worked great!!! Thanks!!
Hehe told ya so!
It creates a chemical reaction between the two compounds.
<took out example as creating unwanted complications>
In laymans terms, it takes the crap off steel and attaches it to the tin foil.
+ It can also be the difference between keeping scales on when polishing a blade and having to take them off with the possibility of damaging them if the rust it around the pivot.
Where does the silver sulfide come from?Quote:
Originally Posted by poona
Used silver as an example. Sulfide is the dark tarnish that we see on loads of silver as they're exposed to the minerals in the air.
Rust has similar reaction with the foil albeit with iron oxide on carbon alloy blades.
Don't make it complicated, I'm just the messenger and a noob at chemistry. I just know it works as my chemistry genius friend tells me. lol