Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Member Dr_Phong's Avatar
    Join Date
    Jun 2005
    Location
    Heppenheim, Germany
    Posts
    125
    Thanked: 1

    Default Dremel Questions

    I was poking around Ebay looking for a Dremel. I noticed there are a lot of inexpensive "clones". I know you get what you pay for, but was wondering what to look for in a rotary tool that I can use for restoring razors and other collectibles.

    Thanks

    Dr. Phong

  2. #2
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    I bought a cheaper alternative, used, for $15... New, it retails for about 60% of the original, and it worked just fine for me. Not on any razor restorations, but on various projects around the house. The original usually has a higher number of RPMs and can operate longer than various knockoffs. However, I don't think you'll need those two features for razor restoration.

  3. #3
    The triple smoker
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    445
    Thanked: 4

    Default

    It all depends on how long you want it to last. I buy tools for the long haul, so a higher initial price doesn't bother me. Buy the cheap stuff if you're only using it for one or two jobs, otherwise the higher end is the better investment.

  4. #4
    < Banned User >
    Join Date
    May 2005
    Posts
    1,304
    Thanked: 1

    Default

    Dr.
    This would be one of the best choices.

    The ebay listing is:
    http://cgi.ebay.com/ws/eBayISAPI.dll?http://ViewItem&amp;category=34087&amp;item=...sPageName=WDVW
    This is also a good deal:

    http://cgi.ebay.com/ws/eBayISAPI.dll?http://ViewItem&amp;category=29528&amp;item=...sPageName=WDVW
    Or you could get by on something like this:

    http://cgi.ebay.com/ws/eBayISAPI.dll...45533&amp;rd=1

    What is good to keep in mind is if it plugs into the wall, try to make sure it has a flexible shaft. Otherwise, the darn cord seems to always get in the way of the work. Most units that use a flex shaft are also variable speed and that is a big bonus. You can do a lot with one of the low voltage cordless ones too. Just remember, it's that old saying, "you get what you pay for".
    Sears has some decent cordless rotary tools. Always get a spare battery so it can charge while you are working with the other one.
    You would also be better off with a tool that has the capacity of aroung 15,000 rpm's. You can do a lot more with the speed. Especially when using radial bristle discs from 3M or fiber wheels. These make short work of most active rusting. Not the pitting, that's a different animal.

  5. #5
    The triple smoker
    Join Date
    Jun 2005
    Location
    Iowa
    Posts
    445
    Thanked: 4

    Default

    The nice thing about a flex-shaft tool (I've got a Foredom almost identical to the picture) is that you can use a submerged bit with no electrical worries. I've done this to save my diamond bits when carving hard stone. The foot speed control is very handy for detail work as well.

  6. #6
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,971
    Thanked: 2202
    Blog Entries
    1

    Default

    The Foredom is the Cadillac of the rotary tools. A clone of the Foredom is available at Harbor Freight Tools. It goes on sale about once per quarter if you have the time to wait.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  7. #7
    Senior Member Dr_Phong's Avatar
    Join Date
    Jun 2005
    Location
    Heppenheim, Germany
    Posts
    125
    Thanked: 1

    Default

    Thanks gentlemen for all the great feedback. I have a razor coming in today that I bought off ebay for the purpose of trying my hand at restoration. My dad has been doing stuff like that for years, so I thought it would be fun to do it with him.

    Dr. Phong

  8. #8
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    This is why I love dis group. I never knew there were so many kinds of rotary tools. Very Cool. Thanks Guys. Lynn

  9. #9
    Senior Member uthed's Avatar
    Join Date
    May 2005
    Location
    Cook County, IL
    Posts
    512
    Thanked: 4

    Default Dremel Safety

    One thing I always like to mention to someone beginning to use rotary tools is safety. The little bits that tighten into the tool to actually do the work at task are very, very small. BUT, they spin around at fantastic revolutions per minute, up to 35,000rpm in some cases.

    Can you imagine what happens in slow motion as one of those high-speed bits fails and shatters inches from the operators body? Does that shrapnel of steel or stone fall instantly to the workbench? Does it travel so slowly as to bounce harmlessly off the operators face or neck?

    I think my point is twofold. 1) Wear safety gear! 2) Buy quality bits for your econo-roto-tool ..... they make bits in Pakistan, yet?

  10. #10
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    Timely too.....my Dremel just crapped out this weekend and now I need a new one.....lol. Lynn

Page 1 of 2 12 LastLast

Similar Threads

  1. Diamond Paste Questions
    By dschoen in forum Stropping
    Replies: 3
    Last Post: 08-02-2005, 04:07 PM
  2. Couple of Questions.
    By MastrTcal in forum Shaving with a Straight Razor
    Replies: 18
    Last Post: 07-12-2005, 12:06 AM
  3. questions about pasted strop
    By finsfan in forum Stropping
    Replies: 3
    Last Post: 06-02-2005, 04:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •