A query about scale blank making from scratch.

In New Zealand gorse is considered a weed and it has proliferated everywhere. This got me thinking about the possibility of using it scales for a razor. I, however won't have the opportunity to complete a set of scales, as I am not planning on purchasing another blade anywhere in the future or removing the scales from the razor I am currently restoring. However, I have wanted to try drying my own wood for a while now for several purposes.

Gorse seems like a good choice of wood as I can get it green and partially dry, also it may give a nice grain when finally finished.

I am unsure as to how I will go about drying the gorse. My research has turned up several methods including drying in a microwave.

I'd like any tips from people who have done something similar, or have researched this topic themselves.

Thanks,

Joundill.

Green timber takes approx a year per inch (25.4mm) to dry naturally. If you cut it to scales, they'll dry quicker, but warp. I'm unsure about speeding the process, but anything you do to rush it will probably lead to cracking & warping.
If you want to use it, get some standing dead wood. it should be well on the way to being dry that way.

Quote:

---

Originally Posted by ben.mid

Green timber takes approx a year per inch (25.4mm) to dry naturally. If you cut it to scales, they'll dry quicker, but warp. I'm unsure about speeding the process, but anything you do to rush it will probably lead to cracking & warping.
If you want to use it, get some standing dead wood. it should be well on the way to being dry that way.

---

I should have access to wood that has been dead for quite a while, however I notice quite a bit of splitting in it and I am unsure what I should do to solve this. I could attempt to build a small solar kiln, however I am unsure as to whether it would benefit me as I have a well ventilated conservatory which has plenty of space for me to sit/hang some gorse.

Might also be worth checking out your local woodworkers (any NZ woodworker forums?) and see if anyone has worked with this wood.

All the best,
Michael.