I am restoring an old family razor and was thinking of using silver pins. Should I use silver? Where can I get silver rods and washers for the pins? I found a site that carries silver rods but the smallest diameter is 1/8 inch.
Printable View
I am restoring an old family razor and was thinking of using silver pins. Should I use silver? Where can I get silver rods and washers for the pins? I found a site that carries silver rods but the smallest diameter is 1/8 inch.
Try Texas Knife supply and you want to search Nickel Silver
Thanks. Is there much variance in diameter across brands?
Most people will just tell you to get #0 washers. That is a good average size for razors, and that is a standard that transcends brands.
silver and nic-silver are too totaly different thing
nic-silver has no real silver in it
Silver is $88 per foot @ .128 dia and way to soft for pins
Surepure Chemetals, Precious & Specialty Metals Supplier : Silver : 99.95% Pure Silver Wire/Rod
Nickel Silver rod is what we normally use for razor pins found here @ $1.75 per foot
http://www.texasknife.com/vcom/produ...fb6c5f8c82a8c1
You should also look at the Brass rod while yer there