Brazilian rosewood... and one for me :)
I've been working with some Brazilian rosewood lately, and, I was certain from the moment tung oil touched it, that tung was the finish to go with. Though, I figured I'd try one with CA anyway to test my gut instincts.
finishes 1
finishes 2
The one on the left is finished with CA and the one on the right with tung oil. It barely shows in the pictures, but I do feel that the tung oil finish warms up the wood a little and also brings out abit more depth in it. Just goes to show that there really is no universal finish :)
Anyway, I also have some more pictures of the CA finished rosewood bruckmann razor I've been working on, so without further adue...
front closed
front open1
front open2
back open
top down
The razor itself has been polished all the way up to 2000 grit and then buffed quite abit. Unfortunently, there was some etching on the face of the blade that I just couldn't keep, but, I'm still very happy with the product. The two little inlayed brass pins near the third pin on the razor were actually a mistake :shrug: I accidentally drilled the third pin in the wrong place, so I just drilled two more for symmetry and then filled in the holes with polished up brass rod.