Results 1 to 10 of 16

Thread: hello!

Hybrid View

  1. #1
    Member tonyspurs's Avatar
    Join Date
    Jun 2007
    Location
    Kent . England
    Posts
    76
    Thanked: 0

    Default hello!

    hello everyone i thought i would introduce myself,i,m from kent the garden of england and i,m new to the art of "real shaving" and heres why.
    i started shaving many moons ago i didnt like doin it then and i dont like doin now, i,ve tried electric razors but they just grab handfuls of whiskers and rip em out! bics disposables ouch!! they just dispose of your face,mach 1,2,3 but all i get is a sore face, i even grew a beard but er no thanks so in the end just accepted that it was a chore that had to be done, then a eureka moment, when on holiday in turkey i had a shave in a barbers hot towels, shaving foam put on with a brush,a lighted cotton bud round my ears and up my nose, and the closest shave i ever had! and it was a pleasant experience!. so when i got home i decided to get myself a str8 razor and turn a chore into something i would look forward to.
    so i got a razor and strop from ebay, 1st mistake should have done research, razor arrived but had,nt been sharpened at all,so checked the internet and lo and behold loads of info,so i,ve ordered a new one from the gentlemans shop which should arrive tommorrow which they told me is shave ready,also a sharpening stone,also ordered the dvd from the real shaving co.so when new razor arrives can i use it after stropping or will it need to be sharpened on the stone? i dont want to ruin it,anyway i,ve been practising lathering up and shaving with a blunt razor and then shaving with the mach3 for now, i think it will take a while to get the hang of it but i,m determined i will,sorry for the long winded post and look forward to learning from you all

  2. #2
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Welcome!

  3. #3
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Smile Welcome, Tonyspurs

    No need to apologize to this crowd for long winded posts. If we all did that there'd be too many long winded apologies.

    Keep us posted on your progress and most of all, enjoy yourself. You're in for some great shaves.

    X
    Last edited by xman; 06-25-2007 at 02:24 PM.

  4. #4
    Member
    Join Date
    Apr 2007
    Location
    South Bucks, UK
    Posts
    84
    Thanked: 0

    Default

    Depends. Tell us what you have bought.

    If the razor is good quality and shave ready, it will just want stropping before shaving. Be careful, because you can blunt a sharp edge with poor stropping, so go very slowly.

    If it isn't shave ready, then it will need honing; depending on what you have bought and your skills, it may take 10 minutes to get ready, or you may need three months.

    And welcome.

  5. #5
    Member tonyspurs's Avatar
    Join Date
    Jun 2007
    Location
    Kent . England
    Posts
    76
    Thanked: 0

    Default

    Quote Originally Posted by paul_lynch View Post
    Depends. Tell us what you have bought.

    If the razor is good quality and shave ready, it will just want stropping before shaving. Be careful, because you can blunt a sharp edge with poor stropping, so go very slowly.

    If it isn't shave ready, then it will need honing; depending on what you have bought and your skills, it may take 10 minutes to get ready, or you may need three months.

    And welcome.
    thanks, i bought a cryil r salter entry model,along with the hand held honing stone/strop,any advice would be most welcome thanks again

  6. #6
    Vitandi syslight's Avatar
    Join Date
    Jan 2007
    Location
    Scharie County, NY USA
    Posts
    2,761
    Thanked: 224

    Default

    it is hard to tell if you will still need to hone the new razor a bit. unless the store offers a honing service it is very likely in need of a little attention. very rarely do you find a new razor that is actually shaving sharp right out of the box. oh, you can, most likely, shave with it but it will not be as smooth and enjoyable as a properly honed razor. which could make you want to quit in about a week as it could pull that much.

    As for the hone/strop hard to tell without more details and pictures.

    there are a number of members in the UK and europe who could help you get you blades shaving sharp. just start a thread about honing services in the UK.
    Be just and fear not.

  7. #7
    Member
    Join Date
    Apr 2007
    Location
    South Bucks, UK
    Posts
    84
    Thanked: 0

    Default

    Quote Originally Posted by tonyspurs View Post
    thanks, i bought a cryil r salter entry model,along with the hand held honing stone/strop,any advice would be most welcome thanks again
    In my experience, a Cyril Salter will need honing - I bought one as my first straight, and I still don't have it honed right. I also have a Wapienica that I bought right after it (as soon as I found this place), which took 15 minutes of fumbling on a Norton 4/8k to reach good enough, and an ebay 6/8 that is now much better than these.

    I don't know what strop/hone you have, could be anything. I'll just second the suggestions to get an expert sharpen the blade to eliminate that as a possible issue when learning.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •