Printable View
Hello, im having trouble finding 8k naniwa professional in my country. But i do have naniwa professional 5000 and superstone 12k. Also does anyone know if the difference between regular naniwa and the professional is big on the high grits(8000 and up)
Hey,
The Naniwa pros/chosera from the 1k go 1,2,3,5 and 10k, only the specialty/superstone has the 8 and 12k.
I go from the 5k to 10k superstone very easily, it usually takes ~ 20 laps to completely remove the 5k stria. Whilst I dont have the 12k you should have no beef with that jump.
What is your country? Maybe a local natural stone would fit the bill off the 5k, rendering the 8k and 12k synths moot.
Oh man, ive been searching so long for those, no wonder i never found them! So are the naniwa 8 and 12k spesialty/super stone the best? i mean are they as good as the professional, or should i get those even tho they are not professionals?Quote:
Originally Posted by markbignosekelly
There are more variables than just the grit jump. What might be an easy transition for an old hand may be a difficult jump for a beginner. If you have some experience and a good loupe you can try it and see if you need something in the middle. I have not gotten a full progression with Naniwa. Currently I have a Naniwa Chosera 1K and a Norton 4/8 and then a variety of finishers. You don't have to stick with t.he same brand all the way through, but that 1K I have is a beauty and as far as I am concerned the bevel setter is the most important of all of the hones.
5k Pro to 12k SuperStone jump is fine.
Ok, so you belive that if i get the 5k professional, i wont need to buy the 8k?Quote:
Originally Posted by Utopian
try out the 5k to 12k and just see what you think. I would even maybe try adding a thin layer of clear tape after you do some passes on 12k to help refine the edge. Could have your razor finished on a 12k by someone who can take it through stones so you know what it should feel like. Also if you did get it honed by someone else you could go long time just using 12k to touch up stone I believe
The Speciality and Pros are both great the only difference is the binder, the Pros wont clog up as quick and feel a little harder whilst honing. No you dont need the 8k but the smaller the jump in grit size the easier the transition to the hone will be.Quote:
Originally Posted by Jamesalot23
5K to 12K no problem If you only need this for a few of your own razors then forget the 8K stone.
The 12k with usual (ie not light pressure) cuts quite fast.
I would do the cutting on one side of the 12k, and keep the other side in perfect condition for doing final light strokes.
Sent from my SM-N910C using Tapatalk