Results 1 to 10 of 12
-
04-20-2024, 11:59 PM #1
- Join Date
- Apr 2024
- Location
- Toronto, Canada
- Posts
- 4
Thanked: 0Seeking Guidance: Looking for my first straight razor!
Hello everyone!
After many years of thinking straight razors were super cool, I have finally decided to start learning to use one. I am completely new to straight razors, and wet shaving in general, but I have been browsing the forum and it seems highly recommended that an affordable way to get started with a straight razor is to buy a vintage razor from somebody else. Unfortuately, I do not know anybody who uses a straight razor. I have looked for local sellers on sites like kijiji but I have not found anything which is a clear choice and I also feel very intimidated because I do not know very much about straights so it is hard to know if the razor is actually good and shave ready. I also read on the forums here that some members sold starter kits but I have been unable to locate anything like this. I have browsed some big retailers as well but I don't know if I should buy used or new as I unfortunately do not have a ton of money to work with.
Thank you all for having me on this site.
Any advice would be greatly appreciated!
Thank you very much,
Risible
-
04-21-2024, 12:49 AM #2
- Join Date
- Jan 2021
- Location
- wv
- Posts
- 38
Thanked: 4I am sure one of the older members on here will have an offer for you. Many good people that wants to promote straight shaving . Make sure it comes shave ready. It is hard for a new person to tell unless it comes from here or a known vendor that is recommended. Lots of new razors say shave ready, and a skilled person can shave with them but they are not comfortable. Some of the vendors offer a honing service for their new razors which is usually a good option. Hope this helps, hang in there it is worth it. Read , read , read and use this forum it is very helpful.
-
The Following User Says Thank You to cycklon500 For This Useful Post:
Risible (04-21-2024)
-
04-21-2024, 01:35 AM #3
You are quite right to be cautious. Lots of crap out there billed as "shave ready", in particular, from sellers who do not even shave with a straight razor.
Yes, vintage is the least painful (financially speaking) way to get started, and a genuine actual shave ready vintage is the least frustrating way to get started. There is ONLY ONE WAY to get a shave ready razor, and that is to buy from a business or individual that is a member of the straight shaving community. There are known and trusted vendors out there, and this, and other, straight shaving forums have "BST" subforums, for "Buy, Sell, Trade". Members thinning out their collections, or those who make a hobby of restoring ebay rescues, often post their stuff for sale. The super good stuff gets snapped up immediately so you need to check it often. The thing is, a forum member has a reputation to protect, and you don't keep a good rep if you sell a razor and say it is shave ready, when it is not. So, if you see a member offering a razor listed as shave ready, it probably is.
What is shave ready? It is a state of readiness in all respects to deliver a decent shave, a shave that is as close and comfortable as your ability allows. A very sharp and smooth edge, with no major chips or dings or burrs. No cracks, no major pitting near the edge, or any at all right on it.
Many curious wannabe straight shavers think the obvious path to shaving excellence is buy razor, make it sharp, then shave and keep shaving until you learn. Unfortunately you simply cannot judge an edge when you do not yet have experience shaving in the manly manner. A lot of newbies shave their forearms and say, yeah, sharp, but that is pocketknife sharp, not razor sharp. Big difference. And trying to teach yourself to shave with a razor that you are trying at the same time to teach yourself to hone, is a perfect storm of frustration. You won't know what to blame, your shaving or your honing, so neither one will improve any time soon. You BEGIN with a shave ready razor, then learn to strop it and shave with it, along with learning to prep your face, and when you are comfortable with the process and getting good results, THEN you are ready to learn to hone your razor.
Most guys will recommend starting with TWO shave ready razors, actually. Shave with one. When it is dull, send it out TO A BONA FIDE COMMUNITY MEMBER, for honing, and shave with the other. Or get the tools you need to hone the dull one, and have a go, while you still have the other one sharp and ready to shave with.
You will need a strop. There is a recent thread on the subject. You will also need a puck of shave soap or tube of cream,NOT the stuff you squirt out of an aerosol can. And a brush. Best is badger, and Silvertip is the best common grade. There are other grades, like "pure" and "best" and "black". Black will be somewhat scratchy and I do not recommend. Boar is cheaper but also scratchy and doesn't hold product as well as badger, BUT after a month or two they do break in somewhat. A brush can cost a few bucks for cheap boar in a molded plastic handle, or $300 or more for a fancy pants old school quality brand made from absolute best materials by expert craftsmen. Obviously you want to start somewhere in between. I suggest a large to larger, 26mm to 30mm, silvertip brush in plain plastic handle from Larry at www.whippeddog.com. Best bang for the buck unless you figure out which Chinese maker is making a decent brush THIS week. They come and go, crap shoot. Used to be Frank Shaving, then Virginia Sheng, now, who knows. Don't waste your money. Larry charges a few bucks more than the Chinese makers, but he won't ship a brush that obviously sucks, because... why? Member of the community, that's why. Reputation to protect. Really great value for the money. I have three of his big 30mm tall handle ones and I really like them. For a strop, you might ask Tony Miller at https://heirloomrazorstrop.com/ if he has any entry level ones on hand. Not super cheap, but good solid workmanship and good solid components. Avoid the $10 special China or Pakistan strops. Some will recommend a belt but I can't. A belt is simply not made for stropping razors. Ditto newspaper. Either will work in an emergency, but simply not having bought your first strop yet, is not an emergency, just lack of planning.
Soap doesn't have to be expensive to work, just expensive to have a fancy odor that lingers all day. Cheapest I can recommend is Arko, a Turkish shave stick type soap. Doesn't smell so nice but the smell goes away almost immediately and it lathers pretty good. Better is Godrej Rich Lather, a cream that comes in a tube though they also have pucks. Get it at your local Indian shop if you live in a big city, or online. I used to get this in Dubai for like 75 cents US per tube, so I stocked up any time I was in the Persian Gulf area. Expect to pay several dollars in the US but that is still cheap, as proper soaps and creams go. Truly great stuff. Slightly upscale is Proraso, AKA C.O. Bigelow, as rebranded in the US. Cella has devoted fans. These are good solid middle shelf products. You can go upscale and easily pay $20 or $30 or more for a puck of soap, and you might like it enough to consider it a bargain, or you might not.
The reason I am pushing brush and soap is this... before you even get your first straight razor, you can be working on your prep, the biggest part of which is making a good lather with plenty of lubrication and cushion. Edge or Gillette Foamy or even classic Barbasol won't cut it. Learn prep, and learn to map your face and control angle and pressure, and even your current razor type will give you an improved shave. When you are ready to put naked steel to your face, you will already know a big chunk of it.
For your first shave with your first SHAVE READY razor, no need to strop, but every other shave thereafter will suck progressively worse if you don't strop first. Youtube is your friend. So is Tony Miller. An Illinois strop will do. Vintage can be okay but only if it is not stiff as a board and not cracked or wrinkled or all cut up. A truly great strop will cost well over $300, but don't go there because you will probably destroy it while learning. Tony will sell you a replacement body if you slice or nick yours, and the first time, you can just swap ends to put the damage over on the left hand side. Stropping does not "sharpen" in that its use is not honing, i.e. no metal is removed. Instead, the extremely fragile edge, which is easily deformed on the microscopic scale, is realigned or straightened, restoring much of its cutting ability and comfort. After a few weeks or months, the razor will need actual honing, but that's another time and another topic.
For now, check BST, https://sharprazorpalace.com/razors-blades/. There are trusted vendors on Amazon and ebay but I don't have a list handy. You can always ask on this forum or others if a certain company is known for good products and service, same as fleabay sellers. Don't post links to active AUCTIONS, for obvious reasons, but Buy It Now offers are fine, AFAIK, as are seller names, or pics of a listed razor.
Good Luck, and Happy Shaves.
-
-
04-21-2024, 01:51 AM #4
- Join Date
- Jan 2022
- Location
- canada
- Posts
- 370
Thanked: 43Pretty sure Tony doesn't ship to Canada anymore.
-
The Following User Says Thank You to stoneandstrop For This Useful Post:
Risible (04-21-2024)
-
04-21-2024, 02:04 AM #5
- Join Date
- Apr 2024
- Location
- Toronto, Canada
- Posts
- 4
Thanked: 0
Thank you so much for your detailed response!
I had no idea that the strop and prep were also so important, I thought cream was just cream but it seems I was wildly mistaken. Thank you very much for your recommendations, I will look more closely at getting some soap and a brush while I look for a razor so that I can start learning ASAP!
I looked through the BST section early and it did not seem very active but maybe I just haven't figured out how to use it correctly yet. I will take another look through it thank you.
When I eventually start and my razor needs to be honed again where should I locate a "BONA FIDE COMMUNITY MEMBER"? Is this something you just make a post about and somebody replies with an offer?
Thanks again for all your help!
Risible
-
04-21-2024, 09:54 AM #6
- Join Date
- Feb 2018
- Location
- Manotick, Ontario, Canada
- Posts
- 2,783
Thanked: 556I see you are in the Toronto area. I bought my first new straight razor from Phil at Classic Edge Shaving (Google his website) when he was in Hamilton years ago. He is still in business and sells a complete beginner straight razor starter kit with razor, bench strop, brush, shaving cream and razor oil for a reasonable price. The added advantage is that Phil will professionally hone the razor before shipping so you know it will be shave ready. He also has some instructional videos on his website.
Happy shaving.David
“Shared sorrow is lessened, shared joy is increased”
― Spider Robinson, Callahan's Crosstime Saloon
-
The Following User Says Thank You to DZEC For This Useful Post:
Risible (04-21-2024)
-
04-21-2024, 10:08 AM #7
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,286
Thanked: 3223Yes, I'd recommend Phil at Classic Edge also.
https://classicedge.ca/collections/s...ge-pg-00384786
BobLife is a terminal illness in the end
-
The Following User Says Thank You to BobH For This Useful Post:
Risible (04-21-2024)
-
04-21-2024, 02:00 PM #8
- Join Date
- Nov 2013
- Location
- Saint Marcellin, France
- Posts
- 417
Thanked: 154Hey there !
A lot has been said that I don't need to come back to.
That being said, since you're an absolute beginner, I guess there is no harm in buying a sacrificial blade and paddle if you can get both for less than 20 bucks.
When you will be learning to strop there is a good chance you will ruin a good blade and nick your leather with bad gestures.
Provided the blade is not in too rough a shape, it can be salvaged later, and the strop goes to the bin. $20 is not that expensive a lesson.
I always keep blades on hand for newbies , but just the port would kill the deal (and I'm not an authorized seller anyway)
Oh and yes, prep. That's pretty much the only part on which Sweeney Todd is spot on. Quality soap, quality brush (yes Yaqi brushes on AliExpress make good starters, and yes Arko works well enough and is cheap), learn to do it with your current razor if not electric.Last edited by Aggelos; 04-21-2024 at 02:08 PM.
Beautiful is important, but when all is said and done, you will always be faithful to a good shaver while a bad one may detter you from ever trying again. Judge with your skin, not your eyes.
-
The Following User Says Thank You to Aggelos For This Useful Post:
Risible (04-21-2024)
-
04-21-2024, 05:10 PM #9
- Join Date
- Apr 2024
- Location
- Toronto, Canada
- Posts
- 4
Thanked: 0Wow thank you very much for all the replies!
I will keep looking through the BST section to see if anything pops up and I will also look through the Classic Edge catalogue.
As far as I can tell to get started I need a straight razor, a brush, soap, and a strop. Am I missing anything?
I was also wondering if it is possible to change the scales eventually or if that would through off the balance of the blade.
Thank you very much,
Risible
-
04-21-2024, 06:20 PM #10
- Join Date
- Nov 2013
- Location
- Saint Marcellin, France
- Posts
- 417
Thanked: 154That should be all for starters.
At some point your razor will need a touch up, but you're not there yet.
And yes, re-scaling a straight is a common practice.Beautiful is important, but when all is said and done, you will always be faithful to a good shaver while a bad one may detter you from ever trying again. Judge with your skin, not your eyes.
-
The Following User Says Thank You to Aggelos For This Useful Post:
Risible (04-21-2024)