Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Member rrp1501's Avatar
    Join Date
    Jan 2009
    Location
    Sardis, Ohio
    Posts
    407
    Thanked: 86

    Question Razor Grip while stropping...

    Hi all, I've been trying to practice using a strop on a junk razor of mine before my good strop and razors get here. I'm having a terrible time with the grip on my razor though. I'm gripping the strop between the middle and ring finger with the index and middle finger under neath the strop, but my grip on the razor is terrible! it keeps rolling in my fingers. I keep trying different grips but nothing seems to work. The hardest part is when I try to roll the spine of the blade on the strop. Just can't seem to hold on properly and the angle on my wrist is really uncomfortable. Can anyone give me a grip I can try? Thanls alot! Ray

  2. #2
    Troublemaker
    Join Date
    Apr 2008
    Location
    Modena, Italy
    Posts
    901
    Thanked: 271

    Default

    Place the blade flat on its side on the horizontal strop at the farthest point away from you and with the edge facing away from you, holding the tang between your thumb and index finger, and push the razor towards you with your index finger. When the spine reaches the closest point to you, roll the razor over on the spine, not the edge, with your thumb and index finger, so that the edge is now facing towards you and push the razor along the strop with your thumb. When you get to the other end, roll the razor over on the spine between thumb and index finger and repeat.

  3. The Following User Says Thank You to Chimensch For This Useful Post:

    rrp1501 (01-09-2009)

  4. #3
    Comrade in Arms Alraz's Avatar
    Join Date
    Nov 2008
    Posts
    976
    Thanked: 332

    Default

    I use my index finger at the bottom and my thumb to hold the razor and then roll the thumb flipping the razor back and forth. The only thing that moves in my hand when I strop is my thumb, everything else, wrist and all (there may be some movement of the other fingers in the hand) is still. I will try to post pictures of my grip later.

    Al raz.
    Last edited by Alraz; 01-09-2009 at 02:20 PM. Reason: clarity

  5. The Following User Says Thank You to Alraz For This Useful Post:

    rrp1501 (01-09-2009)

  6. #4
    ---
    Join Date
    Jan 2009
    Posts
    1,230
    Thanked: 278

    Default

    Quote Originally Posted by rrp1501 View Post
    The hardest part is when I try to roll the spine of the blade on the strop. Just can't seem to hold on properly and the angle on my wrist is really uncomfortable. Can anyone give me a grip I can try? Thanls alot! Ray
    I have the same problem. The tang on my blade is rectangular and 4mmx9mm. It doesn't make for easy rolling. Why don't they make this bit circular like a pencil?
    One thing that can help a little is to flex your wrist down when you turn the blade edge away from you. Means the blade itself needs to be turned less.

  7. The Following User Says Thank You to Rajagra For This Useful Post:

    rrp1501 (01-09-2009)

  8. #5
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    This barber textbook excerpt on honing and stropping helped me out. It says that you should not turn your wrist. The book recommends practicing by laying the razor on the strop and turning the blade with your thumb without stropping until you are comfortable with turning the razor. I hold the razor with my thumb on the tang and my fore and middle finger underneath on the spine.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  9. The Following 2 Users Say Thank You to JimmyHAD For This Useful Post:

    kenneyty (01-09-2009), rrp1501 (01-09-2009)

  10. #6
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    Hi Guys,

    I am attaching a couple of pics of the grip I use when stropping. The first picture is when I am pulling the blade to me or to from top to the bottom of the strop. Then I roll on the spine and the second picture is when I am pushing the razor away from or back to the top of the strop. Key is to keep the razor very flat across the strop with minimal pressure.

    Hope this helps.

    Lynn
    Attached Images Attached Images   

  11. The Following 4 Users Say Thank You to Lynn For This Useful Post:

    JimmyHAD (01-09-2009), kenneyty (01-09-2009), Rajagra (01-09-2009), rrp1501 (01-09-2009)

  12. #7
    ---
    Join Date
    Jan 2009
    Posts
    1,230
    Thanked: 278

    Default

    Quote Originally Posted by Lynn View Post
    Hope this helps.
    I think it will. The angle of the scales helps too.

  13. #8
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Lynn, you've got them razors lined up like soldiers to the right there.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  14. #9
    Senior Member blabbermouth
    Join Date
    May 2006
    Posts
    2,516
    Thanked: 369

    Default

    This is how I grip both strop and razor:

    Name:  Stropping.JPG
Views: 1921
Size:  29.7 KB

    A close up of my razor grip used while stropping:

    Name:  Razor Grip.JPG
Views: 625
Size:  24.7 KB

    I keep the scales in line with the blade, and a very loose grip with the last three fingers supporting the handle. Most of the work is done with the thumb and index finger.

    Scott
    Last edited by honedright; 01-09-2009 at 03:58 PM.

  15. The Following 2 Users Say Thank You to honedright For This Useful Post:

    Rajagra (01-09-2009), rrp1501 (01-09-2009)

  16. #10
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Default

    A great piece of advice I read in one of the barbers' manuals is to flip the razor between your thumb and forefinger with the thumb on the edge side of the tang and the forefinger on the spine side, trying to keep our wrist stationary throughout. Works for me.

    X

  17. The Following 2 Users Say Thank You to xman For This Useful Post:

    flyboy (01-09-2009), Rajagra (01-09-2009)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •