Results 1 to 10 of 17

Hybrid View

  1. #1
    Junior Member
    Join Date
    Apr 2008
    Posts
    10
    Thanked: 0

    Default Hone selection advice, Belgian Coticule combo vs Norton8/4k

    I am looking to get into honing and am looking for some advice

    I got a NATURAL COMBO COTICULE (BLUE AND YELLOW) as a gift and the description states:
    Quote:
    The Yellow coticule is an extremely versatile and efficient sharpening stone. Can be used wet, dry or wet with a slurry. The normal grit of the stone used without a slurry is 8000 grit. When used with a slurry, the grit drops to about 6000
    and

    Quote:
    The Blue coticule is a natural sharpening stone with a grit of 4000, making ideal for re-sharpening a dull blade
    Does this mean that I can skip on buying a Norton 4/8k combo? I thought the coticule was more of a finishing stone.

  2. #2
    Senior Member
    Join Date
    Jan 2007
    Location
    Athens Greece
    Posts
    240
    Thanked: 10

    Default

    Buy a norton 1000/4000

    As for coticule combo you have

    Blue with slurry apr 6000 , with water aprox 9000
    Yellow with slurry aprox 8000, with water aprox 12000

    but this is my personal oppinion only.

  3. #3
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11044

    Default

    You will find advocates for both stones. IME having both is very useful. Whether you are a beginning honer or advanced you will find a benefit in more options. This article in the SRP Wiki gives a beginner much to go with and the superb articles by Bart also here in the Wiki do the same. Combined the two stones and the information available make learning to hone an easier task then with lesser documented hones.

    Edit ; Welcome to SRP !!!
    Last edited by JimmyHAD; 03-17-2009 at 05:14 PM.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  4. #4
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,552
    Thanked: 3795
    Blog Entries
    1

    Default

    You wrote you are looking to get into honing. Does that mean you want to do honing to maintain your own razors or to do additional honing? Do you intend to have a few razors, or shall we say, more than a few?

    If you just want to maintain a few of your own razors, a coticule is sufficient, especially if you read some of Bart's recent posts in the honing section. If you want to hone more than that, then you would greatly benefit from having an additional hone in the 1k range for bevel setting. Now, Bart can and does set bevels with a coticule, but most of us mortals would be better off with a more coarse hone for that job.

  5. #5
    Senior Member
    Join Date
    May 2008
    Location
    Travelling the world!
    Posts
    223
    Thanked: 36

    Default

    Quote Originally Posted by Utopian View Post
    You wrote you are looking to get into honing. Does that mean you want to do honing to maintain your own razors or to do additional honing? Do you intend to have a few razors, or shall we say, more than a few?

    If you just want to maintain a few of your own razors, a coticule is sufficient, especially if you read some of Bart's recent posts in the honing section. If you want to hone more than that, then you would greatly benefit from having an additional hone in the 1k range for bevel setting. Now, Bart can and does set bevels with a coticule, but most of us mortals would be better off with a more coarse hone for that job.
    +1 on the 1k range bevel setting stone. From my reading thats the way to go. Takes for ever on a 4k and they clog up quick, a couple of hundred passes and you need to refresh them. I have a norton 220/1000 and use the 220 occasionlly for razors that need a 'hamering'. (I know ill be burned at the stake for that) But starting low just makes things quicker in to use a friends words, and i have found this very true. You can spend 3 hours on a 4k or get it done with a 1000 and use the 4k to get the 1k scraches out. makes sense to me. Now of course im asuming your getting ebay or antique shop razors and fixing them. If you just keeping an edge you will be fine with what you have, mabey the 4k/8k but stick with what you have and when you feel like you need more get it. (you will also have a better idea what you want, even after a few weeks of reading and playing)
    But if you want to set bevels on old razors the hones i have suggested above and a loupe is great to see wether you have gotten all the chips out and are progressing well. For $8 you cant say no http://www.uxcell.com/precision-opti...s-p-11684.html

    +Buckler
    Last edited by Buckler; 03-17-2009 at 11:45 PM.

  6. #6
    Junior Member
    Join Date
    Apr 2008
    Posts
    10
    Thanked: 0

    Default

    Thanks for the input.
    You wrote you are looking to get into honing. Does that mean you want to do honing to maintain your own razors or to do additional honing? Do you intend to have a few razors, or shall we say, more than a few?
    I would like to have more that a few razors down the road but for now I have more questions then answers. For now I ordered a new "double arrow" to practice, once I conquer that I am planning to look into some of the older razors on ebay.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •