Results 1 to 10 of 10
Like Tree5Likes
  • 4 Post By Lynn
  • 1 Post By Lynn

Thread: Whipped dog razor and strop question. Beg

  1. #1
    Junior Member
    Join Date
    Apr 2011
    Posts
    2
    Thanked: 0

    Default Whipped dog razor and strop question. Beg

    Hello SRP world. I have been shaving with a shavette for about 2 years now and actually want to take the next big leap. I have a pretty good routine(I think), as per my college living budget for pre and post shave and have no problems with cuts and or other problems. I feel confident with my routine as I have to think back to remember the last time I cut myself; I find that putting on some old old music and simply taking my time works wonders. My question follows: how long should I expect a razor from whipped dog be able to shave with simply application to the "poor mans strop" I also plan on purchasing. I am on a budget so will not be able to get any hones for about a month. I have been sharpening personal knives with a norton oil stone for some time now so I am not *too* worried about not being able to transition to straight razor honing. As any realist I am well aware there will be a great learning curve and more excited to jump into this new hobby than any other feeling.

  2. #2
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    A freshly honed razor, used every day by someone with an average beard, should remain serviceable for 2-3 months depending on the users experience level and ability to strop. The variance can be large. When the razor starts to pull a little, it can be touched up with pastes, barber hone or a finishing and be maintained for a much longer period of time and for many, even years.

    Dive in and enjoy!

    Lynn

  3. The Following 4 Users Say Thank You to Lynn For This Useful Post:

    bhorsoft (04-03-2011), DLB (04-02-2011), moehal (12-13-2012), Sunbird (04-03-2011)

  4. #3
    Junior Member
    Join Date
    Apr 2011
    Posts
    2
    Thanked: 0

    Default

    Thanks for the speedy reply. Thats good news. I only shave about twice a week, three times at the most. I just may have to increase that once I get my hands on a real piece of metal. Would a 4/8k norton stone and better grade strop be able to service my face once poor mans strop becomes nicked to death? I plan on getting a finishing stone but am unsure of which route to go. I am set on the norton though.

  5. #4
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    Quote Originally Posted by popsspop View Post
    Thanks for the speedy reply. Thats good news. I only shave about twice a week, three times at the most. I just may have to increase that once I get my hands on a real piece of metal. Would a 4/8k norton stone and better grade strop be able to service my face once poor mans strop becomes nicked to death? I plan on getting a finishing stone but am unsure of which route to go. I am set on the norton though.
    I would practice with refreshing the razor before picking up other hones unless you intend to pick up more razors and learn to hone them. On the strop, I would use the one you get and see how it goes. You can always check out other stuff down the road.

    Have fun,

    Lynn
    Steel likes this.

  6. #5
    ace
    ace is offline
    Senior Member blabbermouth ace's Avatar
    Join Date
    Dec 2010
    Location
    Virginia
    Posts
    3,362
    Thanked: 581

    Default

    It's tempting to jump into all of this (shaving, honing, and stropping) at the same time, but it can get complicated for someone new to straights. I would concentrate on getting the Whipped Dog razor and the poor man's strop and work with that. You can eventually move to honing, and the Nortons are fine for that, but for refreshing your razor all you would need is a Barbers' Hone, and they are available in great quantity and cheaply on Ebay. The razor, the strop, and the Barbers' Hone will keep you going for months, maybe more. Then you can move into honing as your budget allows.

  7. #6
    Senior Member janivar123's Avatar
    Join Date
    Oct 2009
    Location
    Porsgrunn Norway
    Posts
    883
    Thanked: 173

    Default

    Being brand new and plain strop id say one month before you need a touchup
    I also have had an annoying discovery about my cheap abused strop vs my artisan made one(properly treated and abused the cheap one wins every time"illinois"(add name to prevent the real crap)

  8. #7
    Member bhorsoft's Avatar
    Join Date
    Mar 2011
    Location
    Acworth, GA
    Posts
    40
    Thanked: 5

    Default

    This is getting me some of the info I need. I've got one razor made shave ready by Lynn, so it currently doesn't need anything other than stropping for a while. However, it will eventually start pulling a bit and I will want to touch it up before trying the full hone routine. I'm liking the idea of a barber hone as my first purchase - and maybe a cheap, serviceable razor to practice with on it before I put my daily shaver to it.

  9. #8
    Senior Member
    Join Date
    Aug 2010
    Location
    Vancouver, BC, Canada
    Posts
    1,377
    Thanked: 275

    Default

    If you get the "Poor Man's Strop Kit", it comes with both a leather strop and a "pasted strop" -- a piece of balsa covered with CrOxide (one side) and FeOxide (other side).

    With those pastes, in addition to the strop, you should be OK for several months. Instructions are included.

    Charles

  10. #9
    Texas Guy from Missouri LarryAndro's Avatar
    Join Date
    Jul 2009
    Posts
    1,135
    Thanked: 252

    Default

    If you buy a barbers hone off Ebay, hunt up some of the threads here about lapping (sanding smooth) the hone. It's not hard, and you can DIY.

  11. #10
    Member bhorsoft's Avatar
    Join Date
    Mar 2011
    Location
    Acworth, GA
    Posts
    40
    Thanked: 5

    Default

    I picked up a Sunasack barber hone on e-bay for cheap and (from the photos) it looks unused - no chips, dents, or dings. Thanks for the info about looking into lapping it. I'll do a forum search and see what I can find.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •