Results 1 to 9 of 9
  1. #1
    Senior Member icecow's Avatar
    Join Date
    Sep 2006
    Posts
    107
    Thanked: 0

    Default Over-honing=bad. Over-stropping bad?

    I'm dieing. I'm real tight right now from various colliding expenses colliding with recently inflicted DE RAD.

    So I'm going to squeeze myself like a turnip and get a strop and a cheap straight edge razor and have it honed by a pro.

    Then I'm planning to strop each side 30-50. times a day and hoping it will stay sharp for 2-3 months till I get some more cashola.

    If I strop each time like 60 times will that be bad for the straight edge? or just be good, yet diminishing return?

  2. #2
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    As stropping will not remove any metal, it won't be bad, but it won't do you any good either. 20-30 passes are all you need for stropping the blade. I would not shave with a blade any more than 15 times before a touchup on the hone/pasted paddle strop and I usually touch mine up after about 10.

  3. #3
    Electric Razor Aficionado
    Join Date
    Apr 2006
    Posts
    3,396
    Thanked: 346

    Default

    If you're short on cash, there are several really inexpensive ways to extend the life of an edge. Both posterboard-type cardboard and newspaper can be used as a fine-grit stropping material. Cut a 3" wide strip of the cardboard and tape it down on a flat board or your table or counter and lightly strop the blade on it. You can also use a piece of newspaper, which is slightly finer grit. Both of these can be used spine-leading(stropping motion) or edge-leading (honing motion), though edge-leading works better you've got to be more careful that everything really flat or else you'll munge your edge, so spine-leading is safer because it's harder to mess up.

    If you want a little coarser hone, then you can smear a little abrasive paste on the cardboard to good effect.

  4. #4
    Senior Member icecow's Avatar
    Join Date
    Sep 2006
    Posts
    107
    Thanked: 0

    Default

    Are there any free videos that show how to hone? (or strop).

    I'm familiar with the 1 on google video. That's where I learned about this place.

    thanks for your responses thus far

  5. #5
    Electric Razor Aficionado
    Join Date
    Apr 2006
    Posts
    3,396
    Thanked: 346

    Default

    Not that I'm aware of. Some of the guys here have been known to give lessons via skype though...

  6. #6
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    I believe there are some animated diagrams in the help files.

  7. #7
    Senior Member superfly's Avatar
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    1,950
    Thanked: 16

    Default

    Yes they are. Both animated videos, done by me, and also the videos at the yahoo video, which I posted 2-3 weeks ago, I think in general forum. Excellent stroping and honing technique... Lynn's video should be very good, also. I don't have it yet, but I plan to order it soon.

    Nenad

  8. #8
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,764
    Thanked: 5017
    Blog Entries
    4

    Default

    I did a honing experiment a while back here the result is in the help files. What I found out is that stropping 60x before shaving seemed to do the most for the blade as far as edge maintanance goes. Stropping more does nothing for the blade. It won't harm it your just exercising you wrist.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  9. #9
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,974
    Thanked: 2204
    Blog Entries
    1

    Default

    If you want a video session then just contact me at one of the services below.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •