Results 1 to 8 of 8
Like Tree4Likes
  • 1 Post By tlittle
  • 1 Post By jdto
  • 1 Post By armiller17
  • 1 Post By Otto

Thread: Hand gets in the line of site on sideburn stroke

Hybrid View

  1. #1
    Member Thirdman47's Avatar
    Join Date
    Jan 2012
    Location
    Chicago
    Posts
    40
    Thanked: 8

    Default Hand gets in the line of site on sideburn stroke

    Don't know if other newbies have this problem. When I start in on the sideburn, WTG, holding the razor in the prescribed manner, my hand is in the way so that I can't see the end of the razor (I forget the name of the round end, opposite the tang) when I move it towards my face. I've had a couple of close shaves (pun intended) with my earlobe, and did nick it once.

    Am I not holding the thing the right way? Should I be using a 3-way mirror?

    Thanks in advance!

  2. #2
    Senior Member tlittle's Avatar
    Join Date
    Sep 2011
    Location
    Brooklyn, NY
    Posts
    104
    Thanked: 20

    Default

    I noticed the same thing when I started. I think I just turned my head to the side a bit and used a little more peripheral vision, but to be honest I just learned where to put the razor eventually. I was just very careful at the beginning.
    regularjoe likes this.

  3. #3
    I'm on The Straight Road jdto's Avatar
    Join Date
    Sep 2011
    Location
    Toronto
    Posts
    1,371
    Thanked: 183

    Default

    +1
    I just turn sideways.
    regularjoe likes this.

  4. The Following User Says Thank You to jdto For This Useful Post:

    driver/examiner (02-04-2012)

  5. #4
    Member armiller17's Avatar
    Join Date
    Feb 2011
    Location
    Maryland
    Posts
    41
    Thanked: 5

    Default

    I had the same difficulty for the first few shaves myself...I think it is a fairly common difficulty that many beginners share . A three-way mirror, if you have one, may help you learn where to place the blade and check on how you are holding the razor. In the absence of that there is no shame in turning around all kinds of ways so you can see what you're doing!

    Before I got comfortable with just "knowing" where to place the razor without fear of it touching my ear I would err on the side of safety and just not shave very close to my ear. Then, when I came back for the XTG pass I could take off the hair I had missed by taking the razor across my cheek from just under my ear towards my mouth.

    Hope this helps...keep trying and you'll learn something every shave!
    regularjoe likes this.

  6. #5
    . Otto's Avatar
    Join Date
    Sep 2008
    Posts
    3,754
    Thanked: 3708

    Default

    Learn to shave with both hands. It makes life easier.
    regularjoe likes this.


    "Cheap Tools Is Misplaced Economy. Always buy the best and highest grade of razors, hones and strops. Then you are prepared to do the best work."
    - Napoleon LeBlanc, 1895

  7. #6
    Member
    Join Date
    Feb 2008
    Posts
    52
    Thanked: 4

    Default

    I put my fingertips at the bottom edge of my sideburn, right above where I want to cut, then I move the blade up until I feel the side of the blade touch my fingertips (hope that makes sense). At that point I know the edge of blade is pretty much in place and I can kind of "feel" what I'm doing. Then I clean up with a second across the grain pass later.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •