Printable View
Ok, I want to crox this balsa board using a mixture of Fromm dressing. What is the mixture ratio? I know I don't want to use to much. I sanded it with 600 grit paper on glass like a stone. Whould you say I need refine it with a smaller grit size. Once completed how many laps should I perform on the 8 inch board and how often?Attachment 91254
This is an excellent start. The prep is fine. I have tried finer grits but anything past 1000 just seems to make the surface harder to me.
If you paint it on with a brush then I would recommend about a tablespoon of the dressing. Mix in the CrO a little bit at a time using a small stir stick or some toothpicks. The Fromm dressing is already pretty thick so the mixture should get nice and green but not too thick. I am guessing here, but it will probably accept ~ teaspoon of CrO. Some guys use a light oil or even water as a thinner if it gets too thick. Paint it on liberally with a small 1/2" or so make-up brush (steal from your mother, wife or girl friend; they are very soft) :) or modeling brush and let it dry. You can get a second or even a third coat from a tablespoon. Enjoy.
I strop ~20-30 laps with rather light pressure then go straight to the leather for 100. I may repeat this if necessary but if it needs more than this on the balsa/CrO you may need to hone the bevel back into perfection. Good luck.
Attachment 91256
