3 Attachment(s)
First restoration, a John Primble «Blue Grass»
Hi! I restored my first straight razor this Christmas, an ebay bought John Primble «Blue Grass». This forum and the wiki-pages were indispensable at all stages of the restoration, and I registered and posted this to show my appreciation to the community here.
The razor started out with broken scales, rust, patina and dirt everywhere – the usual, as I've come to understand. My goal wasn't to make a showpiece, but rather to breathe some much needed life into the tool so that it can once again return to duty. Prior to purchasing this razor I bought a splendid Geo. Worthington, but it desperately needed a friend.
Attachment 151174
From what I can tell, the razor is from sometime after 18901, sold by W.B. Belknap Hardware and made by H. Boker. I'm not intimately familiar with grinds, but I appears to be hollow ground. There was limited and even hone wear, so I imagine that the blade has several decades of usage left in it. The off-putting part about the blade was that the tang was asymmetrical and tapered only on one side. This made the fitting process more complicated than necessary, and the blade was ultimately not one hundred percent centered.
There is probably not much I can tell you about the actual restoration. The blade I just polished using normal chrome polish. I probably should have sanded it down first, but I didn't want to ruin the etching so I skipped that part. I might go back later and put a proper polish on it if I find that it rusts easily. I made a set of scales from some ipe I had laying around, and a wedge from osage orange. Both woods are quite dense, and hard to work by hand, but elbow grease goes a long way. I'll probably get some powertools before doing another one. I shaped the scales using a farrier's rasp and by sanding, and finished it by sealing the surface with CA, sanding it more and, finally, buffing it with some white compound. As I said, the advice from the stickied restoration threads2 were invaluable, and in general things went smooth.
CA sealed ipe takes a great polish – it if weren't for the weight and stiffness of the scales you'd think it was plastic. The osage orange provides a nice contrasts to the ipe, but it'll probably darken with age. Polished ipe is surprisingly interesting. The pictures doesn't really do it justice, but there's some nice subtle movement there.
Attachment 151175Attachment 151183
I honed it today and took it for a spin. It shaves great! Thanks everybody!
- http://straightrazorpalace.com/razor...tml#post116220
- http://straightrazorpalace.com/works...wers-here.html
