Wald 3118 solingen Es-ese Germany restoration

Printable View

08-10-2014, 02:43 PM
Memk

3 Attachment(s)

Wald 3118 solingen Es-ese Germany restoration

hi there just thought id share my latest project .
i picked up a Wald 3118 razor from a flea market in Germany (paid 5 euro for it ! ).
in pretty decent shape , it has a name with accented letters scribed on one side of handle ...it reads I think ..."Brimfelsk 34"
i assume this was an owner at some point in 1934 perhaps ??
if any one knows the history id love to hear !
anyways it cleaned up really good and was my best shave yet !!
the steel has a slight blue hue to it the patina i guess .
Attachment 175749
after cleaning i attempted in my own manner to hone it (pats myself on back )
and think i did my best work yet pops hair like a champ!
edge didnt take much work . i went at it with wet and dry sand paper on a sheet of glass starting with p500 grit and progressing up to 2000 . then i swiched to "micro mesh" sheets to go up to 12000
finished on a brown "franz swaty" stone and stropped on a wood backed homemade leather bench strop .
Attachment 175751 Attachment 175754

hope you like !!
sorry i dont know how you guys measure blades , i will look in to it and put up measurements if you like ?
cheers !
08-10-2014, 03:13 PM
silverloaf

Looks like a nice blade, I like the patina look on it. Sounds like you did a good job honing it up yourself, the proof is always in the shave, so good job! Looks like an 11/16 or so to me. From top of spine to cutting edge is how I measure, some go from cutting edge to where the spine bulges. Either way gets you within 1/16" and I don't fuss over it unless its a big blade.

C f ern, 1920s-30s perhaps????
08-10-2014, 03:22 PM
Memk

Hey thanks ! Yeah the shave worked out great !
08-12-2014, 08:37 PM
DaveW

Es-Ex. I wish I turned up ERN's efforts at flea markets here, but it doesn't happen.

I have one of those, they are nice shavers, nice uniform edge and good and straight.
08-12-2014, 09:11 PM
Substance

just scored 1 of these with molted scales
I hope it cleans up well also
08-12-2014, 10:35 PM
MJC

My next work trip to Germany, I'm going to ask for Flea Market time as my recreation....
08-13-2014, 01:21 AM
onimaru55

C. Friedrich Ern, Solingen-Wald in 1922, Kanalstrasse 43 in 1939. Brand names: 'America Del Sud', 'Army and Navy', 'Ator', 'A.V. Humboldt', 'Balance', 'Bank', 'Bar', 'Barbersone', 'Barbers Pet', 'Barden', 'Bessimar', 'Bur', 'Cuba', 'Electro Taban', 'Ern', 'Ern 1166', 'Ern A-Z', 'Ern-Blaauwappen', 'Ernette', 'Ern-Goldwappen', 'Ern-Grünwappen', 'Ern Junior', 'Ernovo', 'Ern-Silberwappen', 'Es-Ex', 'Farwood', 'Flaggen', 'Generale Ameglio,' 'Gong Razor', 'Gorki', 'Janissaire', 'Junk', 'Justrite', 'Ka Ci Be', 'King George', 'Knight Commander of the Bath', 'Kuroki', 'Laborista', 'Le Mondain', 'Lerne', 'Leiste', 'Liliput', 'Little Dorrit', 'Magnetic', 'Master', 'Master of Arts', 'Master of Science', 'Mickiewicz', 'Moustafa Kemal Pascha', 'Niazi', 'Nodzu', 'Oxama', 'Palmerston', 'Peer', 'Perfecto', 'Persian', 'Platypus', 'Primus', 'Protector', 'Püt', 'Raccoon', 'Roosevelt Razor', 'Schwert', 'S Essex', 'Sim Mart', 'Ski', 'Strandbad', 'Suneo', 'The Boss', 'The Crown And Sword Razor', 'The Kid', 'The Michaelin', 'The Mussel Razor', 'Turban', 'Waldern', 'Waldoo', 'Wee Macgreggor', 'Zeibek', 'Zepp.' Open- blade razor maker.
08-13-2014, 02:25 AM
sharptonn

Nice razor. Good idea to keep it minimal. It must shave the part. It looks great!
08-13-2014, 06:37 AM
Memk

MJC...
Totally ! I am sure you will find lots of razors . The market i hit up was in Hannover and there were at least half a dozen i could have bought ... I'm trying not to get into collecting them ( might be a lost cause allready ) .
08-13-2014, 06:44 AM
Memk

Quote:

Originally Posted by sharptonn

Nice razor. Good idea to keep it minimal. It must shave the part. It looks great!

Yeah i try to just do the minimum , in the future id like to remove pins and be able to clean the whole blade .
I like them still looking kinda old , dont want to remove too much steel !
I need to figure out the best way to clean in the checkering / gymping ?
08-14-2014, 12:49 AM
onimaru55

1 Attachment(s)

Quote:

Originally Posted by Memk

I need to figure out the best way to clean in the checkering / gymping ?

3M make rotary fibre discs to suit Dremel etc.

Yeah that's an SX too . :)
08-21-2014, 06:24 AM
engine46

Beautiful job we'll done!!! I love it when a blade pops hair, you know it's gonna shave well. Congrats on the fantastic work!