2 8/8 Dorko in giraffe bone

I had a request for a couple bone scales. The owner sent me the new blades and some Giraffe bone to use for the scales. The bone slabs were rough, real rough. Heavy mill marks, voids etc... I had to back fill some spots with epoxy to get them all leveled out for the scales.

He wanted adjustable fastiners so I dug some up out of my scale supplies. The wedges are Gabon ebony with traditional 1/16 brass rod pins and washers. I forgot how much I hated working with bone. Stinks to high heaven, much worse than horn. They got a high grit sanding a polishing to give them a nice sheen. Turned out pretty good in the end. I patterned the scales after an old Wade and Butcher set.

Attachment 184597
Attachment 184598
Attachment 184599
Attachment 184596
Attachment 184595
Attachment 184594

Very clean looking I love the shape and finish of the bone
Job well done in deed

I can't imagine the smell either but the end product looks beautiful!

Very pretty

From the pics I cannot see any stria. Very well done.

My thoughts are that the bone scales and black wedge go nicely with the spine and blade. The "FBU" scale shape is classic.
It seems to work well with most blades big and small, just adjust the scale for the ...er... scales! :D

Nice job

No sabe kimosabe, please elaborate for those of us with some dull edges. Hold on...just looked again and I think you are politely suggesting that the proportions are a might off of scale to blade ratio and that the razor may be sitting too low in the scales due to the thickness of the wedge......am I close Tom?

Quote:

---

Originally Posted by sharptonn

My thoughts are that the bone scales and black wedge go nicely with the spine and blade. The "FBU" scale shape is classic.
It seems to work well with most blades big and small, just adjust the scale for the ...er... scales! :D

Nice job

---

My intent was to say The shape of the FBU scales goes with lots of blades if they are proportioned to the blade.
I can agree, by your observations, the wedge may be a bit thick which would see the blade a little too deep. ;)

And to end on a positive note, to the OP, I think the giraffe scales turned out beautifully. Agree that the stink of bone is like a nightmare in a dental chair. Many years ago I was grinding a Sperm Whale tooth in a jewelry making class and the whole class gave me the 'stink' eye.

Quote:

---

Originally Posted by WW243

the whole class gave me the 'stink' eye.

---

So did the nickname stick, Bill? ;)

The bone looks much better, then the Factory scales, nice work!

I used Giraffe bone once - that was enough for me. It wasn't the smell so much as being the hardest material Id ever made scales from. I like to use a proper wedge in scales but this stuff just didn't want to bend - I got there in the end but won't be rushing to try it again.

Nice job by the way.

After this no one talked to me, I would guess the nickname was worse than 'stink' eye.

Quote:

---

Originally Posted by sharptonn

So did the nickname stick, Bill? ;)

---

Quote:

---

Originally Posted by WW243

After this no one talked to me, I would guess the nickname was worse than 'stink' eye.

---

Bummer! Been there, done that! :rolleyes:

Great looking Dorkos, great looking scales Dave. I have always admired your masterful skills. :chapeau

Hahaha just got b!tched at, with I quote
"what hell were you doing in the garage, that stink is all through the house"
Me - "grinding bone" (camel & dry)
Bride - "well you can do that Sh!t in the shed down the back next time"
me - "spose I will just wet sand in future hey"
LOL