18 Attachment(s)
Smith & Hawksley's Customised
Smith & Hawksley's 8/8ths.
Took a few pictures along the way :)
Info
Attachment 306060
Satin Finish but I ended up with a polished finish.
Attachment 306043
Cut the scales from stabilised burr
Attachment 306044
Thinned them.
Attachment 306058
Drilled the pin holes / Small bit first followed by a larger bit.
Making sure they are flat.
Attachment 306050
Now I can join the scales and profile them.
Attachment 306056
Bevel the edges.
Attachment 306045
Hand sanding 400/1000/2000/3000. Red Bull Needed.
Attachment 306052
Buffed them.
Attachment 306046
Fashion a wedge.
Attachment 306059
Finished by hand
Attachment 306053
Cut the lining. Slow speed & 2 hands.
Attachment 306049
Scratch up the sides
Attachment 306057
Glue & clamp them
Attachment 306047
Flatten the scale ends. Not easy to do.
Attachment 306051
Mock up time , Blade is a little too low ,sand the wedge a bit.
Attachment 306055
Glue and clamp the wedge to the scales
Attachment 306048