3 Attachment(s)
Making a cracked Genco into a shortie
I guess I got a bit confident fitting purchased horn scales to a shortened blade. This time I crafted my own scales.
I used a polyester material from Lee Valley they claim can be worked like wood. It comes in sheets about 1/8? thick, so I didn?t have to thin it - a bonus since I don?t own a belt sander. I did discover it is a tad brittle, especially when subjected to freezing temperatures in a UPS turck for a weekend before delivery.
Attachment 355406
They quickly sent replacement sheets packed with much more robust padding at no charge to replace the fractured pieces. I was greatly impressed with their customer service.
Even at room temperature, it was still brittle. My first attempt shattered while using a jig saw and when peening.
Eventually, I covered both sides with painter?s masking tape before cutting the pattern and drilling the pin holes.
I have a photo of an intact Clauss with the shortie for comparison.
Attachment 355407
This was my first attempt at building scales, so I used a spacer rather than a true wedge. Had to leave something for the next project.
Attachment 355408
FYI - the colour I used is called ?lapis lazuli?.
