Thread: Henckels 8/8 worked spine in Olive

I am finishing up a batch of razors and thought I would post a couple photos since it has been a while since I pimped my work. This is a 8/8 worked spine Henckels that I sanded and polished then mounted in a set of olive wood scales. The pins are made from 1/16 inch brass rod stock with a stainless washer with a brass washer over it. These blades are so thick you have to use a third spacer pin which I make from the same stock but only use one small brass washer so it does not affect the flow of the wood. I used a Madagascar rosewood wedge.The scales are finished in gloss epoxy resin.