Wade & Butcher in Canary Wood

The canary wood scales are finished in epoxy, wedge is acrylic. I still haven't mastered wedges yet. The finish on the epoxy smooth but not glass. No bubbles just not perfectly smooth. I have only seen mine so I'm not sure how smooth they get? Should be a good shaver once I get it honed up.

http://i559.photobucket.com/albums/s...os/wb-can3.jpghttp://i559.photobucket.com/albums/s...os/wb-can1.jpghttp://i559.photobucket.com/albums/s...os/wb-can2.jpghttp://i559.photobucket.com/albums/s...os/wb-can4.jpg

Good job . Looks really nice and clean

Very nicely done! :tu Pining looks good also.

Epoxy can be a bugger. Done right it should look like glass. Make sure the wood is oil, dust and dirt free. If you touch it with you fingers the oil may cause a fish eye. It takes a long time to cure but patients helps here. A light cost of epoxy to seal the wood. Let it dry and sand lightly to smooth surface and scuff up the finish for the next coat to 'bite'. I put one of those picnic nets over it, the ones to keep flies off food and then cover that with a towel to keep dust off while it cures. A perfect finish isn't required if you can live with it. I have a couple from my learning curve that aren't 'perfect', but they are much better than the scales that were on it. Maybe some day when I stop buying straights my son an I can re-scale them again. Then again maybe he can re-scale them himself when he get older.

Good luck!

Good job. + 1 on the pins.

If you just want a gloss on the epoxy you could try a cutting compound or car polish. Just protect the blade with tape etc.
Nice tight grained timber - reminds me a little of bamboo.

nice work mate I like the colour & grain of the scales. & the blade finish is just stunning.Paul