Printable View
1 full inch of beautiful Henckels steel wraped in some new Amboyna Burl scales...
The finish is CA the hardware is all Bi-Metal washers and Nickel Silver pins
the center spacer is a carved Brass bead.... The wedge is Amber...
Attachment 49026
Attachment 49027
Attachment 49028
Attachment 49029
Attachment 49030
Attachment 49031
S.W.E.E.T.... The CA finish turned out stellar, nice and smooth, and the burl has a nice pattern to it. Great job G-Bro.
Mad Max look real close at the tang fit on that last pic Bro, this was one straight Friodur :D... The offset to either side is within 1000ths hehehehe
One of the best ones I have seen..
I had noticed. Amazing really especially with a Friodur.
Beautiful work mate. I like the fancy center spacer, did it come at exactly the right size or did you have to modify it? Nice hammer too, is that what you use for your pinning?
That is a caramel-n-cream dream of a razor. :tu Beautiful - I love seeing all the different interpretations of the rescaled Friodur blades.
I've usually seen amboyna used with a liner for support. Is it best to have a liner in most cases? If so, then are these scales a tad thicker than usual for added strength, or would the third pin lend strength to the scales? Or am I just way off? :shrug:
Absolutely stunning work Glen! The owner is going to have a treasure.
That would be me! :)Quote:
Originally Posted by lz6
Outstanding job, Glen! A true master piece! Thank you!
That right there is the perfect example of why I would never be able to do work on someone else's razors. After creating something like that how do you then put it in a box and send it off never to see again? I don't have that kind of strength, (to say nothing of skill). Truely a beauty.
Quote:
Originally Posted by mrbhagwan
No your not way off, but there are a ton of "tricks" in that build
:)
These Friodur razors are very finicky, that's part of what Max and I were talking a bit about in the first posts... Honestly I have done so many of these in Wood, Acrylics, and Horn that I have the pattern down to a science to balance, and straighten them out.. This one was an exceptionally straight one, in fact maybe the straightest I have seen...
I won't do them at all without the 3rd pin, it is almost a necessity on these to get them to sit straight, and yes they do add strength if done right...
The thickness you see is a bit deceiving because of the rounding, of the outer edges...
I use CA on Burls for the strength reason and I have a certain way of doing it to emphasize that... I have tried most every metal liner down to .005 brass and have never accepted the balance, so I go the other direction and strengthen the wood...Unbalanced razors are a pet peeve of mine..
You could also use stabilized wood but I am not that partial to the look...
If you look really close you will note that the center post fits perfectly, and the flex in the scales for strength, is not pulled out of line... (Yes Baldy I fit it very carefully with a file) that nice even flex creates strength also...
Everything combined makes these a pretty strong set of scales..
I called these "tricks" at the beginning but honestly there isn't one of them that wasn't used on vintage razors other than the CA.... I learned everyone of them from tearing apart old razors...
Hope that answers some of the questions :D
Stunning. The wedge is a nice compliment.
Is this perspex, natural amber or another type of material?Quote:
Originally Posted by gssixgun
Quote:
Originally Posted by dirtychrome
Re-con Amber from Masecraft...
Wowwwww, just wooooowwwwwww. That's one heck of a looker Glen. Nice job
beautiful razor and a beautiful shot!
Congrats, Glen.
Nice scales, you just made up my mind for me!!
My dream razor!!! You really know how to hurt a guy!
Great Job!!:deadhorse:
Wow, That's a beauty
My dear Glen:
When workmanship and beauty combine, the result is a razor deserving high praise. Well done, sir.
Regards,
Obie
Nice work Glen! Another beauty from the shop of G. :tu :tu
Not enough good adjectives left to describe this beauty. Everyone is right on, it's fantastic. That Amboyna is my favorite wood. Nice classic scale shape.
Your photography has come along nicely, too.The pics are very good.
Beautiful example of form following function, G
:tu
G-Man, that just looks killer!
Man, I love those scales..! :bow
Nice job, and good job taking pics too, such a huge improvement from only a few months ago. You just need to double their size now so we can really see that grain :)
Quote:
Originally Posted by Undream
Thanks Brad between your suggestion on the Speed and Max's suggestions on the light, they are finally looking decent anyway :)
Made me drool...
Sent you a PM...
Just adding my compliments to this thread.
The workmanship on this razor looks fantastic -- especially the decorated third pin.
As others have said, the new owner of this blade is going to receive a real gem.
