Thread: Any Archers out there??

Originally Posted by animalwithin

Thanks SVMAD! I have heard that an FOC of greater than 10 is ideal, that doesn't help much haha. Does that mean 10%+ of the arrow's total weight lies in the broadhead? At the moment I'm shooting a 60 lb Hoyt recurve and definitely want to set up my own arrows but there is so much out there. I have a 28" draw length so I'm assuiming 29" shafts would be ideal, target only for now. I want to use a 125 gr fieldpoint but I know there is much controversy between 100/125. And I'm not sure if 29" is best or perhaps 28".

I was looking at aluminum Easton shafts, was going to fletch them with 5" feathers, Easton knocks.

I would keep them at 29inches, and if you feel later that you want to go to 28.5 or 28 inches, you can experiment. 5 Inch feathers are the best, especially in recurve, where it will stabilize your arrow the quickest.

FOC refers to the middlepoint of the weight of your arrow. Remember, if you have an 28inch arrow, the middlepoint would be 14inches (middlepoint of arrow). However, FOC refers to the percentage that the weight point of the arrow is from the middlepoint of the arrow. Thus, if you have a 28 inch arrow with a 14inch middlepoint and a 10% FOC, this would mean that the balancing point of your arrow would be 10% (or 2.8inches) towards the fieldpoint or BH. Remeber, that the higher your FOC, the more leverage it gives the feathers to steer your arrow. Thus the more FOC, the easier feathers would correct your arrows flight path and stabilize your arrow. Please let me know if this makes sense.
Thanks