5 Attachment(s)
Custom H-Frame hydraulic press
I had a new H-Frame hydraulic press made and it is finally done. It should comfortably handle 50 ton.
Attachment 147566Attachment 147567Attachment 147568Attachment 147569Attachment 147570
This started as 5/16" thick C-channel and was reinforced with 1/2" thick steel plate.
The top was boxed in with more 1/2" steel and has 1" of additional steel. Sorry, no pics here os the cross member. The cylinder hass a 5" diameter ram. The frame beside the cylinder is to hold the cylinder up when it has to be unbolted from the frame and slid to the side.
Here is a link to all the pics.........
Custom H-Frame - a set on Flickr
The rest of the pics show the workshop of Stinar Mfg of Cannon Falls , MN where the work was done.
I should note that Dennis Danich designed and helped with the initial setup and tack welding then he went with me to Stinar Mfg and answered questions.
I will post more pics when I get it unloaded from my pickup and setup. It is 73" tall and 32" wide.
Oh, the reason I had this built is that the prior press collapsed under the 50 ton pressure.