This is a very nice presentation. When can we expect the 2014 razor catalog? Can't wait.......:rock:
This is a very nice presentation. When can we expect the 2014 razor catalog? Can't wait.......:rock:
Thanks so much for posting this. I think I can learn all lot from someone's well thought out early attempts. You have a strong knife grinding background, and you are really thinking about the differences and similarities between grinding knives and razors. Those are the kind of thoughts that are invaluable to the rest of us who are just beginning the same journey. And, you have produced a damn fine razor. Keep us informed.
Really nice, where can we sign up for a pre order?
Do you prefer cash or bank transfer[emoji1]
Tony,
Great job! Try hot oil for the temper, instead of the toaster oven. I think you will like it. Just be careful not to flash the oil! :O
Tim Z.
Thanks for all of the interest and kind words everyone. To get such a positive response from such a discerning audience is truly flattering.
Now, what y'all are here for, the finish.
First, I like making one-piece wooden scales. Something about the feel of the wood and the simplicity of it makes me happy. But, for this project, I decided to go with, what I consider to be, a more formal set.
I started with laying out the scale shape on a piece of brown paper.
Attachment 164424
I ripped my material and squared it on the disc sander.
Attachment 164425
Traced it, cut it out, put tiny dots of 5 minute epoxy on the middle to glue it together and then squared that up and drilled it.
Attachment 164426
From there, I made a wedge and glued it in. For the record, the wedge in this one is pink ivory. I didn't end up using this construction because, when I finished it, it looked like an exact copy of Tim's carbon series scales. Needless to say, that won't fly:) They also didn't look right on this razor.
Attachment 164438
Once it was dry, I cleaned everything up a bit on the disc sander. Then, I flattened and rounded a piece of scrounged copper, drilled a wedge-pin hole, and epoxied/drove the copper in.
Attachment 164432
I shaped everything on the 8 inch wheel and slack belt on the KMG. I started with 80 grit, then moved to 120, then 220. After that, I hand sanded with 320. Then I oiled it and sanded with 400, building a slurry and really getting it smooth. Then, I cleaned it off and re-oiled it, let it sit for 15 minutes and buffed it off on a clean wheel.
Attachment 164433
After that, I did the final fitting of the scales. For the razor itself, It got taken down to 600 on the face and 0000 steel wool on the rest. Then, I used some dark red rouge on the buffer to give it a nice satin finish all over. So, here it is, all together:
Attachment 164434
The spine:
Attachment 164435
The bevel:
Attachment 164436
I set the bevel on it, but have yet to take it through my whole progression and shave with it so that's the reason my mark is not yet on it:)
I was also working on this, so that's why I didn't have enough time to hone.
Attachment 164437
What would this thread be without at least one knife?!
Thanks all for looking,
Tony
Awesome work again! Well Done Tony.
Like the razor, {and the step by step} but can't help loving the knife. :)
Keep 'em coming.
Adam
Glad you like everything Adam. Yeah, that knife turned out really well. Because I know you care: the steel is 52100 blade steel, differentially hardened (hence the shadows) in Thuya burl scales. I sharpened it on a DMT, then a Norton 1K then went to a JNat with some slurry and worked on it 'til all the slurry was gone. The knife is scary, scary sharp.
I'm going to try a razor with 52100 soon, but will likely have to do a bit of grain refining during HT:)
Thanks for sharing all of this Tony. I really like the final outcome on your razor. It has a great flow of steel and scales and looks like it will be sweet to shave with. The knife is a beauty.
As an update, I completely honed it and shave tested it. I really took my time with the hone, working with the DMT to make sure that the bevel was perfectly even before ever moving on to the 1K. I honed all the way up to my Shapton 8K, then took it to my JNat with slurry, finishing on just the jnat and water. I CrOx'ed it on balsa, then on linen, and final finished on deer hide.
I got a beautiful shave from it, perhaps the best I've had. The blade is big enough to feel good in the hand and balanced for a good stroke. I tempered a bit cooler this time for a bit harder blade and I really, really like it. It's not quite as buttery as the others I've made, but makes up for it with a wonderfully acute edge. All in all, I think it's the perfect balance.
Thanks again everyone for all of the praise and feedback.
Tony