Results 1 to 10 of 25

Hybrid View

  1. #1
    Senior Member superfly's Avatar
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    1,950
    Thanked: 16

    Default

    I don't oil my razors lately, but if you must use oil, best bet is oil without aditives, i.e. mineral oil (100% parafinoll) or natural oil that doesn't go rancid, i.e. Camilia oil. After all, that is what samurai used on their swords for 1000-s of years...

    Nenad san. Hai.

  2. #2
    Senior Member blabbermouth JLStorm's Avatar
    Join Date
    Feb 2006
    Location
    Rocky Mountains, CO
    Posts
    2,934
    Thanked: 16

    Default

    what type of stores could I find Camilla oil in? It is too damn expensive to use my good oils (they cost about $15.00 per ounce). I havent seen this stuff around anywhere, maybe I have been overlooking it. Can I get it at a pharmacy or supermarket, or only at an art store type place??

  3. #3
    Senior Member monte6177's Avatar
    Join Date
    May 2005
    Location
    Napa, CA
    Posts
    116
    Thanked: 2

  4. #4
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Josh, just go to any pharmacy and you'll be able to get like 12oz of generic Mineral Oil for $2-3. It doesn't go rancid, it preserves the metal, you can use it on sharpening stones, hedge trimmer blades, hair clippers and it keeps you regular

  5. #5
    Senior Member
    Join Date
    Jun 2006
    Location
    Venice, FL
    Posts
    236
    Thanked: 0

    Default

    i'm glad someone brought this up, because i've been meaning to ask something.


    until recently, i've had three razors in my possession: a brand new dovo, a torrey, and a junk razor called zimmerman from IL. here's what bugs the hell out of me:
    the junkrazor and the torrey (both pretty old by the look of them) will not rust, but the dovo contiually develops rust. i use maas on it, let it dry completely, then wipe it down with mineral oil, and when i look at it the next day or the day after (i use that one every day), it has little rust spots.

    the torrey, on the other hand, i've only used about four times in two months, never polished or put mineral oil on it, and it has never had a rust spot.

    i never used the junk razor, but had it out several times just fooling around with it, and it never had any spots either. both of the older razors have some black stuff or spots here and there, but they don't change.

    i'm pretty sure they're all plain old carbon steel, though i admit i don't know how high the carbon content is and how it might vary. it seems to be more related to the age. has anyone here noticed new razors rusting more easily?

    what the hell?

  6. #6
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Someone mentioned the posibility of celluloid scales on some razors deteriorating and evaporating some corrosive stuff.. Clean up the DOVO and keep it in a separate room than the other two razors. If it doesn't develop any rust, then you know the culprit and one or both of the others may need to be re-scaled. Their steel just may be less succeptible to celluloid fumes.

  7. #7
    Senior Member
    Join Date
    Jun 2006
    Location
    Venice, FL
    Posts
    236
    Thanked: 0

    Default

    the scales on the torrey might just be plastic. how can i tell?

    and the junk razor stays in its coffin, away from the other two. i'm pretty sure that one is celluloid. i keep both of the razors out, now, but for a while i kept all three of them in their coffins (love that term). would the fumes move outside one coffin and into another?

  8. #8
    Senior Member blabbermouth JLStorm's Avatar
    Join Date
    Feb 2006
    Location
    Rocky Mountains, CO
    Posts
    2,934
    Thanked: 16

    Default

    Quote Originally Posted by FiReSTaRT
    Josh, just go to any pharmacy and you'll be able to get like 12oz of generic Mineral Oil for $2-3. It doesn't go rancid, it preserves the metal, you can use it on sharpening stones, hedge trimmer blades, hair clippers and it keeps you regular

    Sounds like the wonder cure for all my ailments!!!

  9. #9
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    The crazy part is that all of my claims are true. I've used it on oilstones, hair clippers, to keep carbon steel edges from corroding and my hedge trimmer without any problems. It's also good to prevent diaper rash (baby oil is just scented mineral oil) and it really is used as a laxative (softens up the stool). The bottom line is that it will protect your blades as well as anything and is dirt-cheap.

  10. #10
    Senior Member blabbermouth JLStorm's Avatar
    Join Date
    Feb 2006
    Location
    Rocky Mountains, CO
    Posts
    2,934
    Thanked: 16

    Default

    Quote Originally Posted by FiReSTaRT
    The crazy part is that all of my claims are true. I've used it on oilstones, hair clippers, to keep carbon steel edges from corroding and my hedge trimmer without any problems. It's also good to prevent diaper rash (baby oil is just scented mineral oil) and it really is used as a laxative (softens up the stool). The bottom line is that it will protect your blades as well as anything and is dirt-cheap.

    My mom picked me up a bottle today from a drug store...she said it was the only one they had and it was so big it will last me until Im 105....I havent seen it yet lol Im scared

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •