Results 1 to 10 of 15

Hybrid View

  1. #1
    Plays with Fire C utz's Avatar
    Join Date
    May 2005
    Location
    Sometimes here, Sometimes there
    Posts
    980
    Thanked: 12

    Default Stropper? What and why....

    I have been wondering what the general use of strops are? Paddle versus hanging strop. For regular use, and not pasted touch-up's.

    To be more precise, how many users have started with a particulat type, and then switch to the other, and stay with it? Has anyone found that after using the paddle strop, or the hanging strop they have found it superior to the former...and why?

    I've always used a hanging strop. However, when ever I had used a paddle strop, I always found it easier to use. BUT, for some reason, other than for pastes, I have never made the dive to use/own a paddle strop for daily stropping. I recomend them, but hypocritically, don't use it!

    How 'bout you others?

    C utz

  2. #2
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    The reason hanging strops are better for regular stropping is that they take fewer passes, thus being being quicker. Paddle strops are good for travelling though and I may get one for that purpose. However, for regular stropping, my regular Heirloom will do just fine

  3. #3
    Senior Member Tony Miller's Avatar
    Join Date
    May 2005
    Location
    Nottingham, Maryland
    Posts
    2,559
    Thanked: 382

    Default

    I think that for most, the paddle strop is a specialized tool for sharpening, not aligning the edge. A haning strop has far more surface area and is the right tool for daily, pre-shave stropping.

    There are a few guys here, some with a lot of experience who use a wide paddle for daily use prefering the advantages of a rigid surface over the negative of smaller surface area. (I am soon to have a solution to that <g>).

    I do however, often suggest a paddle for a beginner as it give a guy on a budget a single tool to get the job done. Three sides for mild abrasives to keep his razor sharp a month or two down the road when his shave ready razor is no longer shave ready and to give him a very usable, but not ideal too for daily use before each shave.

    I based this on how I started. You make the decision to drop $100-150 on a razor, strop, mug, soap brush, etc... from a vendor, get your stuff home and dive in. A few weeks later the razor is pulling instead of cutting. Now what? You call your vendor, or come here to SRP only to be told you now need to spend more money on a hone, or a second strop, or to send your razor away, etc.... Back into the wallet for more money on a hobby your are not really at home with yet. So, with a single tool in my opinion, a pasted paddle and you "could" go forever if you had to. Yes, you will add other stuff later if you like this hobby but you don't have to go there.

    BUT, if you are sure you will continue AND have the funds start with the hanging strop and go from there

    So, hanging strop........best tool for the job, hands down. Paddle strop, most versatile tool, but not the best. To do it right, for me anyway you need a hanging strop, a hone/stone and/or a paddle with finer pastes.

    Tony
    The Heirloom Razor Strop Company / The Well Shaved Gentleman

    https://heirloomrazorstrop.com/

  4. #4
    Senior Member blabbermouth JLStorm's Avatar
    Join Date
    Feb 2006
    Location
    Rocky Mountains, CO
    Posts
    2,934
    Thanked: 16

    Default

    I have a monster strop from Tony... I think the overall dimensions are 4" x 42" with a stropping surface of 4" x 28.5" and man it makes stropping my monster razors SOOO much easier. I have a paddle strop for refreshing, but still depend on lynn for honing. Most of my razors are pretty irreplaceable so Im afraid to even try...plus now I am so spoiled lol.

  5. #5
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Quote Originally Posted by Tony Miller
    There are a few guys here, some with a lot of experience who use a wide paddle for daily use prefering the advantages of a rigid surface over the negative of smaller surface area. (I am soon to have a solution to that <g>).
    Tony, are you thinking of a hanging strop with a stiff back?

  6. #6
    Senior Member Tony Miller's Avatar
    Join Date
    May 2005
    Location
    Nottingham, Maryland
    Posts
    2,559
    Thanked: 382

    Default

    Quote Originally Posted by FiReSTaRT
    Tony, are you thinking of a hanging strop with a stiff back?

    Yes, 2 versions actually. One is a hard hanging strop with just a little flex or rigid. The other is based on an old time bench strop I found.... a table top strop with a little give to it.

    Soon, very soon.

    Tony
    The Heirloom Razor Strop Company / The Well Shaved Gentleman

    https://heirloomrazorstrop.com/

  7. #7
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Wood backing or a layer of stiff leather?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •