Nani 12k and Nagura stone

My hats off to gssixguns for his recommend regarding whether or not I should purchase a 12k as my first hone.

Well, he not only did that but suggested a Nagura "slurry" stone to make it even more versatile. Then he pointed me to "One stone hone" approach.

While I didn't need to set a bevel on my Koeller and Schmitz, it would not cut hair. Not even close to cutting hair when pressed against the arm. Using the slurry that the Nagura produced on the 12k, the proper pressure from 3 fingers and demonstrated technique(video howtos), this newb was able to bring the dullard back to life. I can say I've never seen a razor fell so many hanging follicles. I'm nothing less than stunned. This blade was definitely not a 5 laps and your done razor. I had to "push the edge" on heel and toe, do sythe passes, circles and everything else I could remember.

My heel out modded F & R was a little easier, though, as Glen mentioned, the Sheffield steel seemed to take a bit more time to come alive.

Honing wasn't nearly as hard as I'd imagined it, but I can only attribute this to the massive education effort from SRP and its members in advance of my first attempt.

I thank everybody. Honing was a very pleasurable and relaxing experience. I think I understand how HAD happens now. ;)

Glenn <--:chapeau<--:beer2:

Really happy it worked out for you, sometimes a plan comes together :) other times ya wanna throw the razor and the hone against the wall :rofl2:

What type of nagura stone did you use for your nani

Nagura Stone, 7/8" x 7/8" x 3" - Amazon.com

Appreciate it

I really worked wonders for me. The 12k by itself wasn't touching the edge of that F&R. I didn't think it would without probably hours of honing. That lil' Nagura slurried me up a serious cuttin' mix.

Does that slurry come from nagura or hone? Or is it a mixture?

Depends how hard the slurry stone is. The only way to find out is to raise some slurry and look at the color it makes. I don't think it matters though as the results were good. Slurry works great. Most natural stone are used with slurry stones.

Quote:

---

Originally Posted by Siguy

I thank everybody. Honing was a very pleasurable and relaxing experience. I think I understand how HAD happens now.

---

By the time you understand how it happens your too late and there is no help but to buy some more. Just for curiosity sake of course.

Quote:

---

Originally Posted by offshoot

Does that slurry come from nagura or hone? Or is it a mixture?

---

It is an Artificial Nagura a Synthetic slurry stone, it is pretty soft, so it breaks down easily it will release a great cutting slurry and mix with grit released from the Hone, these are tricks to get more out of a one stone/hone system...

People tend to forget or never learn that slurry can be generated and used on many Synthetics hones too, it is just another tool in the bag.. if you have a progression you don't need to use it but if you learn to use slurries it adds to the honing arsenal...

Quote:

---

Originally Posted by gssixgun

It is an Artificial Nagura a Synthetic slurry stone, it is pretty soft, so it breaks down easily it will release a great cutting slurry and mix with grit released from the Hone, ...

---

That's the information I was looking for, thank you. Some man made stones come with slurry stone (like Gokumyo), but I have never tried them. Might do so sometime.

Always pleasure to read and learn how you guys approach the subject.

Understanding the utility of slurry really has me almost believing that I just might be able to take an edge from a King 1k to bevel set straight to the 12k with a series of slurry progression right on up to "clean" water then CrOx, strop and shave. Seeing Lynn and Glen's video on "One Stone Honing"(actually 2. One bevel setter and another), really has me asking the question:

Have I been inhaling the Blue Magic or is this feasible? :dropjaw:

It is funny that if you say that about a Coticule or a Japanese Natural everyone accepts it as truth... But honestly I haven't had it fail yet on any stone/hone that I have tried it on from the 8k Norton to a Swaty, and every natural Waterstone I own..
It works, but it takes time and practice, but the consistency of first time hits are a little low for my use.. A 75% first time hit is fine when you are honing for yourself and can go back and adjust as needed...

Just something to mess with