Results 1 to 10 of 11
Thread: Stone flattening made easier...
Hybrid View
-
12-13-2013, 12:22 AM #1
- Join Date
- Aug 2010
- Location
- Between Owensboro and Bowling Green KY
- Posts
- 236
Thanked: 31Stone flattening made easier...
I had some drywall screen type sandpaper handy do I tried some 220 grit on a vintage Arkansas translucent that needed about an eighth of an inch removal to get flat . It worked really well. I used it with water, although not constantly running over it. Sofar for me , it seemed to cut faster grinding on its own slurry flOating inside the open squares. Maybe took five- ten minutes. YMMV. Worth a try. Lowe's Home Improvement
-
The Following User Says Thank You to JimBC For This Useful Post:
mjsorkin (12-16-2013)
-
12-13-2013, 12:33 AM #2
Thanks, I had forgotten that one! I had used it on the first mudstones that I bought way back when.
~RichardBe yourself; everyone else is already taken.
- Oscar Wilde
-
12-13-2013, 01:34 AM #3
- Join Date
- Nov 2012
- Location
- Across the street from Mickey Mouse in Calif.
- Posts
- 5,320
Thanked: 1184That stuff cleans the heck out of porcelain too ! Old tub soap scum and stuff ,,, bye bye no scratches.
Good judgment comes from experience, and experience....well that comes from poor judgment.
-
12-13-2013, 03:12 AM #4
Argh! Like Geezer, I knew that but had forgotten. Sheesh, a couple of weeks ago I spent over an hour taking a couple of mm off a very hard jnat. Thanks for reminding me.
I guess it's true about the two things that happen as you get older, the memory starts to go and.. well, you know.
rs,
TackI have great faith in fools - self confidence my friends call it.
-
12-13-2013, 09:45 AM #5
I've used 120 grit of sanding mesh like that for a long time. It works better than regular waterproof sanding paper and lasts longer. It does not stay flat though so afterwards you have to continue on sanding paper. I've tried a (worn) 40 grit sanding belt as suggested by others and that works even faster
-
12-16-2013, 06:18 AM #6
- Join Date
- Mar 2009
- Posts
- 1,211
Thanked: 202And just to follow I just experimented with worn out 40 belt and added big pinch of sharp sand. It worked treat. Very fast. No need to get new belt and much smoother scratch pattern. Also feedback is audible. Once it changes the sound you just brush off the old powder and reload with new sand.