Atoma 1200 diamond plate.

[bobski]

I watched Dr Matt, put a bevel on a gold dollar with a diamond lapping plate. I've not come across this method. But his bevel was done in five minutes. He used an Atoma 400, and I cringed, but a couple of waterstones later and he had it sharp and it looked good under the veho.
NOW, I have on top of a dozen quality waterstones, from the nani 1k to the Gokumyo20k & an atoma 400 . He used tape on the spine, which was removed. So here is the conundrum. Bevel setting is 90% of the job, he did it in 5 mins. I imagined a toothy edge off the plate. But toothy edges are easily removed with slurry circles. My point is no spine damage. I have an Atoma 400, next time I obtain a dodgy razor to play with I will set the bevel with the Atoma with tape,, heaps of slurry on a nani lobster 4k and 40 circles each way, look at it under the loupe 40x ??? I'm expecting plenty of feedback guys so get going.

Bob