Thread: Bevel setting

Hi all,
I just joined this forum today and look forward to being apart of it.
as of right now, I have one question regarding bevel setting.
im buying the Norton waterstone kit 4K/8k 220k/1000k with flattening stone and I think I have a very good idea of how to begin learning hones. (But I'll be practicing on one of my cheaper straight razors until I get the hang of it)
I recently purchased a dovo best quality that was "shave ready" but still took it to get honed. Twice. Both times there was absolutely zero improvement. It won't even cut hair off my arm. So my QUESTION: once I'm ready to sharpen this razor, how do I know if I'll need to set the bevel or not before I hone?
thanks!

If it was professionally honed it might be your strop technique. Even the angle you are holding the razor and pressure applied.

Not an expert but I do not leave my bevel setting hone until it will cut my arm hair along the edges entire length. So I'd say if your razor does not cut arm hair now it needs to be bevel set and then honed up through a progression to a finishing hone. Someone more knowledgeable will be along likely with a better answer.

Bob

Welcome to an older but better way of shaving.

I 'think' that if you take the time to carefully read this thread you will find many of your questions already answered!

http://straightrazorpalace.com/razor...holm-sons.html

I would also offer that you check out the Beginners Tips for this month.

It's a long strange trip but well worth the journey!

Sanfte Rasur, mein Klingenbruder!

(Smooth Shaving My Brother In Blades)

Welcome!

A great place to get started is over in the honing section (Honing). There are a bunch of getting started threads to read, and useful videos.

Regarding the Dovo, if it is truly shave ready, like what Straight Razor Designs and others vendors mentioned in this forum, you should be able to shave with it immediately (which is the true test of whether or not it is shave ready).

Some manufacturers say their razors are shave ready, but they are not. My first razor was a Dovo and it was made shave ready by SRD, and I used it right out of the box, as suggested. Worked great.

Who is honing the razor for you? Some sharpening companies may not really know how to sharpen a razor. There are places in the classifieds that you can use, to get honing done.

I'm sure others more experienced will chime in here.

Originally Posted by pcm

Welcome!

A great place to get started is over in the honing section (Honing). There are a bunch of getting started threads to read, and useful videos.

Regarding the Dovo, if it is truly shave ready, like what Straight Razor Designs and others vendors mentioned in this forum, you should be able to shave with it immediately (which is the true test of whether or not it is shave ready).

Some manufacturers say their razors are shave ready, but they are not. My first razor was a Dovo and it was made shave ready by SRD, and I used it right out of the box, as suggested. Worked great.

Who is honing the razor for you? Some sharpening companies may not really know how to sharpen a razor. There are places in the classifieds that you can use, to get honing done.

I'm sure others more experienced will chime in here.

This is what I was thinking. If the guy sharpening your straights doesn't shave with them, chances are he doesn't know how to sharpen them. There's a pretty large difference between sharpening a knife or tool and sharpening a razor. I thought it would be an easy transition, but here I am a year later just starting to get good, repeatable results.

If the bevel is set, it will easily cut the skin of a tomato. Cut into the tomato at a 45 degree angle with the barest whisper of pressure. Do this up and down the blade. Do not make big sideways slices. Just push the blade in with just a hint of a slicing action. When the entire blade passes this test, the bevel is set.

First off, welcome. Second, I would suggest that you send your razor to someone that sharpens razors, maybe srd or whipped dog. That way you know what a shave ready razor is supposed to be like. It may be a good idea to pick up a cheap used razor to practice your honing on as well. As stated earlier, many people end up rolling the edge while stropping as they learn so lots of practice with a used razor will help that as well. With my experience, honing is definitely an art. I have had many failures with my successes at it. Don't get discouraged and have fun.

Welcome! Setting the bevel is the most important thing to accomplish going forward. You MUST have it popping hairs along the entire edge on your 1k hone before moving forward. SOMEHOW!
Get Lynn Abrams CD and pay close attention to his Norton tutorial using pyramids.
You will be on it in no time. At least that is what I did several years before I knew about this forum.
Also, too much info is at your hands doing a forum search on honing with Nortons.
All these years later, still with Nortons, my pyramids have drifted away to what I like personally. Yet I still use them. And a layer of electrical tape on the spine!
JMHO

Originally Posted by Charliebrian24

I recently purchased a dovo best quality that was "shave ready"

From where did you buy it? I ask because it may inform us as to whether or not it actually had been honed.

Originally Posted by Charliebrian24

but still took it to get honed. Twice.

Took it where it get it honed? Did you take it to a razor honer or a knife sharpener?

Have you successfully shaved with a straight razor yet? If so, then your face can be your benchmark, as an edge properly honed on the 1k can shave your face. If not, then you really should hold off on buying those hones. Actually, you probably should do that anyway, since the Norton 220/1k is not the best option, nor is the flattening hone.