Results 11 to 20 of 21
Thread: Dan's Whetstone True Hard
-
08-09-2017, 05:44 PM #11
- Join Date
- Dec 2014
- Location
- Virginia, USA
- Posts
- 2,224
Thanked: 481Pretty much. Soft, Hard, True Hard, Translucent, and Black are all some odd %99 Novaculite, a form of silica if I remember right. The difference is the density of the stone. And when we get to the densest part of the spectrum they break it up by color somewhat. True Hard stones are mottled/banded or a hodge podge of color. Translucents are as the name suggests and as homogenous in coloration as they can manage. And Surgical black stones are, of course, black/dark grey.
-
08-09-2017, 06:27 PM #12
The person to talk to at Dan's is Steve Kirschman, son of founder Dan Kirschman. He is extremely knowledgeable on all things Novaculite. The ladies, love them all, are not expert. They read the script. Steve was emphatic, and now so am I, there is no difference amongst the True Hard group of Arkansas Novaculite stones, including Hard Black and Translucent. Color is the only difference, which is cosmetic, and makes no functional difference. The magic number is, all the True Hards are 2.5+ gravity.
A little advice: Don't impede an 80,000 lbs. 18 wheeler tanker carrying hazardous chemicals.
-
08-09-2017, 06:37 PM #13
Thanks LHT-Great to know. May of us just got more and more confused by the various designations, which apparently aren't consistent from decades past and vary a little between companies. I believe Dan's should know more than anybody, and I know you have researched this topic exhaustively, even with that very useful field trip.
Note to self: "THEY'RE ALL THE SAME." Just hone already-I find this clarity comforting as my banded trans and surgical black sit at the ready beside me on the desk for when work gets too much.
-
08-09-2017, 06:38 PM #14
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 458What I'm saying is that if you have a stone that's 2.65 and one that's 2.55, there will be a difference in fineness. Maybe not after both stones have been used for a few years, but for a while there will be, and then every time the two are lapped.
The difference between the nortons that I've had has been about a tenth. Just about everything I've run into that is really fine is mid 2.6s. While I know their cutoff line is 2.5, if you get a trans from them and it's 2.68 and you get a true hard and it's 2.55 (which I doubt you'll get, I think they'll give stones above that), there will be a fairly substantial difference in cutting properties.
you won't get a trans stone that's 2.55 SG, though, there would be too many pores in it to block light to be like the dan's trans stones (which are "very translucent").
I have a trans coming today (actually, my wife picked it up. If she doesn't go nuts and throw it in the trash (i hope there's not a receipt with it), then I'll be able to measure it tonight).
Certainly not arguing that you can't have a pure white non-trans stone in the density I mentioned above, but when you get to the point where the trans stones are, very slight changes in density make for a difference in performance.
I did have a pure white with color streaks stone from a seller on ebay a couple of years ago that was in the mid 2.6 range and it was about the same as a trans. The seller sold the stones so cheaply that I believe it was $85 with free shipping, he threw in a cedar box with brass hinges that had several compartments, and put a 2x4 gray translucent stone in the box with the white one. I should've bought everything he had.
I think the statement should be that when the density is the same, the three types have similar qualities. There is a range within the grade, though.
In order to measure the density of these stones correctly, you need calipers and a scale that measures in mg, and then to confirm that the stones are in fact square and the same thickness all around.
-
08-09-2017, 06:46 PM #15
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 458Just out of curiosity, I went out to check the density of silica (specific gravity).
...
2.65. (and a follow up look for novaculite shows figures of 2.66 and 2.7). I'm not surprised then that a stone that is almost completely pore free might feel a little bit different than one that is around 5% pores. The pores are what give novaculite stones continued cutting power after the particles have dulled on the surface.
I have measured higher than 2.65 (2.68 or 2.7), but never on a stone that had a regular enough shape that I could say for sure that I'm right (in fact, I'm sure that the odds are way in favor of me not being able to measure the stone in question accurately - which was a natural whetstone black trans that wasn't even thickness, but did have flat planes on it on all sides. They just weren't coplanar).
-
08-09-2017, 06:48 PM #16
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 458(I can hone a razor on a pike washita, by the way, so the concern here has nothing to do with honing razors, they should all easily be fine enough with a properly conditioned surface).
-
08-09-2017, 06:58 PM #17
Learning a bit here. Thanks for sharing all this info. Question, the soft is not the same as the black or thrans right? Its a different animal?
It's just Sharpening, right?
Jerry...
-
08-09-2017, 07:09 PM #18
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 458The soft is a stone with lower density and more pores than anything we're discussing above. It's a faster cutter and less fine.
The hard that dan's sells is between the three truly hard stones mentioned above, but I'm sure you could hone a razor with one that was settled in, especially if you have a good linen and strop.
-
The Following User Says Thank You to DaveW For This Useful Post:
Gasman (08-09-2017)
-
08-09-2017, 07:19 PM #19
- Join Date
- Dec 2014
- Location
- Virginia, USA
- Posts
- 2,224
Thanked: 481DaveW beat me to it. All types are same material. Soft has most pores and lowest density. Hard is in the middle. Then we have True Hard/Translucent/Surgical Black with the least amount of pores and highest density. It's all Novaculite, but the larger pores make a soft stone much more aggressive and fast cutting.
-
The Following User Says Thank You to Marshal For This Useful Post:
Gasman (08-09-2017)
-
08-09-2017, 10:04 PM #20
Thanks for the explanations. Now I might be pushing my luck but here goes, And sorry to the OP for the question, What is the difference between one of these and a Thuringian if they are both very hard and are rated about the same if you were to think in grits? I know, No grit sizes when talking naturals. Just trying to get a grasp on this all.
It's just Sharpening, right?
Jerry...