Results 1 to 10 of 38
Like Tree62Likes

Thread: Beginner Hone Setup

Threaded View

  1. #10
    Senior Member Brontosaurus's Avatar
    Join Date
    Feb 2011
    Location
    Les Vosges, France
    Posts
    924
    Thanked: 185

    Default

    If I were seeking to hone razors, kitchen knives, and pocket knives, all from the same set-up, and for a relatively small cost, I would be inclined to pick up an 8" x 2" soft/hard black Arkansas combo from Sharpening supplies for ~$75USD. You could either use their dedicated, food-safe honing oil or cold-pressed olive oil as a honing medium. Use the combo stone straight out of the box, don't bother lapping it. The black side will smooth over with continued use, but the soft Ark side should be continually refreshed with emery cloth to maintain some cutting power.

    A synthetic water-stone alternative would be a King or Suehiro 1k/6k combo, followed by a pasted strop, either the T-I alox/diamond crayon or the red Solingen paste (tube or crayon). Cost there can range, but with the pasted stop added, it still should be ~$75USD. For starters, use w/d 320x sandpaper on glass to lap the stone as needed.

    Note: I have downgraded the high-end in my recommendations as kitchen and pocket knives would also be sharpened, and in wanting to maintain a limited budget as mentioned. All the same, these should get you to decent shaving. The black hard Arkansas, once smoothed, is an excellent finisher, as is the T-I crayon or Solingen red stuff.
    Last edited by Brontosaurus; 11-28-2017 at 09:03 PM.
    Striving to be brief, I become obscure. --Horace

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •