Results 1 to 5 of 5
Threaded View
-
11-14-2017, 09:59 PM #1
OVB No 96 “Our Very Best” Barber hone test
Here is the OVB No 96 “Our Very Best” by the Hibbard, Spencer, Bartlett @ Co. barber hone being tested. This is a two-sided barber hone and only the branded side for finishing will be tested. No other instructions came with this green and black hone that measures 5”L x 2”W x ½H+-”. History lesson courtesy of Wullie! http://www.thckk.org/history/hsb.pdf
Two identical King Midas Extra Good razors were chosen to test this Barber hone. Both razors were taken to a 1K-4K-Norton 8K level. One of the razors was then progressed to the approx. 15K level on a much finer stone. The edges were visually inspected at 100X magnification at each interval.
8 X-laps, strokes or passes were made with each razor on the OVB to see if it would improve or degrade the razor taken to the Norton 8K edge and the razor honed to the approx. 15K edge.
Conclusion, the OVB No. 96 H.S.B.& Co barber hone did not improve or degrade the Norton 8K edge. It is an aggressive barber hone that can refresh an edge to the 8K level. The approx. 15K edge was degraded. I highly recommend that only 4 laps be done on this barber hone. Indication of a wire or foil edge were becoming evident at 8 passes. Stropping on leather would smooth the edge.
MIke
-
The Following 5 Users Say Thank You to MODINE For This Useful Post:
Brontosaurus (11-14-2017), Geezer (11-14-2017), RezDog (11-15-2017), sharptonn (11-15-2017), Steve56 (11-15-2017)