Page 1 of 2 12 LastLast
Results 1 to 10 of 26
Like Tree24Likes

Thread: New Shapton 8K is nice

Hybrid View

niftyshaving New Shapton 8K is nice 10-13-2017, 07:28 PM
Steve56 The Shapton 2k, 5k, and 8k... 10-13-2017, 07:39 PM
Marshal Your Norton boxes must be... 10-13-2017, 10:54 PM
niftyshaving I guess I need to look at... 10-14-2017, 12:09 AM
Jnatcat Are these Ceramic Kuromaku... 10-14-2017, 04:03 AM
eKretz They are the same as the... 10-14-2017, 08:29 AM
Marshal I was thinking about it and... 10-15-2017, 05:53 AM
bobski I have a question about these... 10-15-2017, 07:27 AM
niftyshaving I had three Nortons. Two... 06-18-2019, 05:26 PM
Marshal Well, that's why I say it... 06-11-2019, 11:25 AM
Gasman When I first got into... 06-12-2019, 12:46 PM
BobH I'm in the same boat as far... 06-12-2019, 01:06 PM
Marshal Yeah, the lines can blur as... 06-12-2019, 02:22 PM
  1. #1
    Senior Member blabbermouth niftyshaving's Avatar
    Join Date
    Oct 2009
    Location
    Silicon Valley, CA, USA
    Posts
    3,157
    Thanked: 853

    Default New Shapton 8K is nice

    The Shapton Ceramic Kuromaku #8000 hone is new to me.
    After one tune up honing and one shave I am quite pleased.

    I may like it for my face more than the finer Shapton Ceramic 12K.

    Too early to say more than watch this rock! It has potential.

    It is splash and go and the box has air vents so it will dry in the box...
    I am now tempted to take a drill and vent my Norton's plastic boxes
    if I do not sell my Nortons to make room.
    Marshal likes this.

  2. #2
    Senior Member Steve56's Avatar
    Join Date
    May 2014
    Location
    Knoxville, TN
    Posts
    1,838
    Thanked: 509
    Blog Entries
    1

    Default

    The Shapton 2k, 5k, and 8k Pro have been my main sequence for some time now. The 2k and 5k for a few years and I added the 8k about a year ago. They do the job well.

    Cheers, Steve
    mainaman and niftyshaving like this.

  3. #3
    Senior Member blabbermouth
    Join Date
    Dec 2014
    Location
    Virginia, USA
    Posts
    2,224
    Thanked: 481

    Default

    Quote Originally Posted by niftyshaving View Post
    The Shapton Ceramic Kuromaku #8000 hone is new to me.
    After one tune up honing and one shave I am quite pleased.

    I may like it for my face more than the finer Shapton Ceramic 12K.

    Too early to say more than watch this rock! It has potential.

    It is splash and go and the box has air vents so it will dry in the box...
    I am now tempted to take a drill and vent my Norton's plastic boxes
    if I do not sell my Nortons to make room.
    Your Norton boxes must be defective. Mine all have vent holes.

  4. #4
    Senior Member blabbermouth niftyshaving's Avatar
    Join Date
    Oct 2009
    Location
    Silicon Valley, CA, USA
    Posts
    3,157
    Thanked: 853

    Default

    Quote Originally Posted by Marshal View Post
    Your Norton boxes must be defective. Mine all have vent holes.
    I guess I need to look at them again.

  5. #5
    Senior Member Jnatcat's Avatar
    Join Date
    Jun 2017
    Location
    Katy Texas
    Posts
    1,041
    Thanked: 135

    Default

    Are these Ceramic Kuromaku stones a step up from the Shapton GS stones I currently use ?
    "A Honer's adage "Hone-Shave-Repeat"

    ~William~

  6. #6
    Senior Member
    Join Date
    Sep 2013
    Location
    NW Indiana
    Posts
    1,060
    Thanked: 246

    Default

    They are the same as the Shapton Pro stones for the most part.

  7. #7
    Senior Member Steve56's Avatar
    Join Date
    May 2014
    Location
    Knoxville, TN
    Posts
    1,838
    Thanked: 509
    Blog Entries
    1

    Default

    Yes, they're non-US Shapton Pros. Here's a breakdown of the Shapton line:

    Shapton Glass HR (white) - designed to cut the Lie-Nielsen stainless A2 plane steel, the softest and fastest and releases fresh sharp grit easily. This is why Glen doesn't recommend them for beginners I believe. Grits are designed to double (or be able to double) in the Glass series for the most part.

    Shapton Pro/Kuromaku - the older 'traditional' line, these are harder and slower. Grits are kind of graded 'coarse, medium, fine' and aren't designed to double.

    Shapton Glass HC (grey) - the newest series, still incomplete, allegedly more like the Pro but on glass. I did see some microchipping (rare for me) on hard Kikuboshi Swedish steel wirh the 8k HR that I did not see with the 8k Pro but that's the only example so far.

    Cheers, Steve
    Last edited by Steve56; 10-15-2017 at 10:43 AM.

  8. The Following 2 Users Say Thank You to Steve56 For This Useful Post:

    Gasman (06-11-2019), Jnatcat (10-15-2017)

  9. #8
    Senior Member blabbermouth
    Join Date
    Dec 2014
    Location
    Virginia, USA
    Posts
    2,224
    Thanked: 481

    Default

    Quote Originally Posted by niftyshaving View Post
    I guess I need to look at them again.
    I was thinking about it and there's a strong possibility the holes are a recent addition. My Norton stones are only 2 years old, maybe less. Just assuming by your join date your Norton set likely predates mine. Nothing a quarter inch drill bit couldn't resolve though.

    Can't really comment on the Kuro 8K, I skipped that and got the 12K. Which I did manage to get a surprisingly smooth and comfortable edge off of. It's just very tricky, and I'm not sure I could replicate those results another time. Good to know that the 8K is easier to coax a comfortable shaving edge from though.
    niftyshaving likes this.

  10. #9
    Senior Member
    Join Date
    Nov 2013
    Posts
    758
    Thanked: 104

    Default

    I have a question about these Shaptons. On an eBay site 330mate they advertise/sell Shapton, Naniwa and a range of naturals that don't get good appraisals. My question is identifying the Shapton stones they sell. They are the ones in the plastic boxes, stated as magnesia, and ceramic. For example their 12k is a cream box with the identifying number K0705, cost $60 USD. Is this the Kuromaku spoken of here? The descriptor says they are not the export models. But they offer the full range up to the 30k version. Are these versions genuine, accurate or to be avoided.
    I should say I did buy a full set of Naniwa superstones from them a year ago on stands and they were the real deal at top prices.
    'Culpam Poena Premit Comes'

  11. #10
    Customized Birnando's Avatar
    Join Date
    Feb 2010
    Location
    Oslo, Norway
    Posts
    5,079
    Thanked: 1694

    Default

    Quote Originally Posted by bobski View Post
    I have a question about these Shaptons. On an eBay site 330mate they advertise/sell Shapton, Naniwa and a range of naturals that don't get good appraisals. My question is identifying the Shapton stones they sell. They are the ones in the plastic boxes, stated as magnesia, and ceramic. For example their 12k is a cream box with the identifying number K0705, cost $60 USD. Is this the Kuromaku spoken of here? The descriptor says they are not the export models. But they offer the full range up to the 30k version. Are these versions genuine, accurate or to be avoided.
    I should say I did buy a full set of Naniwa superstones from them a year ago on stands and they were the real deal at top prices.
    Yes, the cream box is indeed the 12k Shapton pro.
    For your JNat needs, I’d recommend Maksim over at Japanese natural stones...
    Last edited by Birnando; 10-15-2017 at 10:52 AM.
    bobski likes this.
    Bjoernar
    Um, all of them, any of them that have been in front of me over all these years....


  12. The Following 2 Users Say Thank You to Birnando For This Useful Post:

    bobski (10-17-2017), Geezer (10-30-2017)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •