Results 1 to 10 of 11

Hybrid View

  1. #1
    Junior Member
    Join Date
    Feb 2011
    Posts
    13
    Thanked: 1

    Default Naniwa, make sense?

    Hi,

    I am fairly new to straight shaving and feel I am going to stick with it. After a little thinking I figured it would be nice to be able to maintain my blade by myself. I have been reading on the topic and found much more info on real honing than on maintaining. For what I understood a Naniwa super stone 10k or 12k would be nice.

    Does that make any sense, or do you have other suggestions???

    Thank for the advices.

    Regards,

  2. #2
    Senior Member TrilliumLT's Avatar
    Join Date
    Oct 2010
    Location
    Everett, Ontario
    Posts
    1,554
    Thanked: 309

    Default

    Both very nice hones but if your just looking to keep the a nice edge I would recommend you go a far cheaper route. Get a barbers hone and save yourself $80+ bucks.

  3. #3
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    I don't know about saving $80 with a barber's hone, given that the SS 12k is in the $70's, but a barber hone would be a less expensive option. Nothing wrong with the SS12k, though; it's a great hone and would do what you want.

  4. #4
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    The Naniwa 12k is a great stone to have, both as a touch-up stone and as part of a progression, as you'll undoubtedly want to get further into honing in the future. This dual purpose alone is sufficient reason to spring for the Nani. You won't regret it.

  5. #5
    Junior Member
    Join Date
    Feb 2011
    Posts
    13
    Thanked: 1

    Default

    Thanks guys! It sounds like it will be the Naniwa 12k.

    How hard is it to maintain an edge? Should I expect to trash my blade a few time?

  6. #6
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    Quote Originally Posted by Guero View Post
    How hard is it to maintain an edge? Should I expect to trash my blade a few time?
    It's not hard at all, assuming the blade was previously in shave ready condition. All it takes is a few light laps on the hone of your choice and you should be back in action. The lap count depends entirely on the type of hone and how far gone the edge is. With a hone like the Nani you'd probably want to to around 10-20 laps; with a natural stone it may take a few dozen or more. You have to experiment with your gear to find your optimal numbers.

  7. The Following User Says Thank You to Ryan82 For This Useful Post:

    Guero (03-17-2011)

  8. #7
    The Electrochemist PhatMan's Avatar
    Join Date
    Apr 2009
    Location
    Hastings, UK
    Posts
    1,714
    Thanked: 527

    Default

    Guero,

    I tend to use the 'little but often' approach to edge maintenance.

    Weekly the edge gets touched up on a CrOx pasted hard leather paddle, and monthly touched up on a Naniwa 12k. This works very well for me.

    As everbodies needs are different (razor, whisker type etc), it will be a matter of seeing what is best for you

    As the pasted strop uses the conventional stropping action, it is easier to start off with this.

    When I started honing and using stones for edge maintenance, I got an old razor to practice on.

    Good luck !

    Have fun !

    Best regards

    Russ
    Last edited by PhatMan; 03-17-2011 at 07:47 AM.

  9. #8
    Senior Member MaritimeFanatic's Avatar
    Join Date
    Jul 2010
    Location
    Maine
    Posts
    199
    Thanked: 50

    Default

    never used one myself, but I do have a Naniwa 3k/8k combo stone and it is really great. I am sure you won't be disappointed with a 10/12k. I also would recommend checking out the Chinese 12k (PHIG) from woodcraft. It's like 35 bucks, and I love the edge mine gives!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •