Results 11 to 17 of 17
-
12-16-2011, 01:58 AM #11
- Join Date
- May 2008
- Posts
- 289
Thanked: 46I would just wrap it in tissue paper (about 2 or 3 is fine) all around and lacquer it. The Japanese do it with their stones and it works perfectly fine.
-
The Following User Says Thank You to Memorael For This Useful Post:
Magpie (12-17-2011)
-
12-17-2011, 04:12 AM #12
-
12-17-2011, 04:46 AM #13
i would use epoxy to fill the crack. and i wouldnt clamp the stone it will put more stress on the stone
-
12-17-2011, 09:01 PM #14
- Join Date
- Feb 2010
- Location
- Upper Middle Slobovia NY
- Posts
- 2,737
Thanked: 481my suspicion is that the stone was dropped and the edge strike started the split. I am going to pick up a few small epoxy/superglue types, and try applying it to some shale stone I have lazing around. If it works, I will go with the best version of that. if it does NOT work, I will go with the lacquer. I suspect lacquer applied repeatedly will fill the crack in stages, even though it would not be as strong as an epoxy.
-
12-18-2011, 12:13 AM #15
- Join Date
- Jan 2011
- Location
- Lancaster, NY
- Posts
- 129
Thanked: 26Most epoxies would be too thick. Superglue might be your best bet unless you can find a real thin epoxy that will wick into the crack.
-
12-18-2011, 05:48 AM #16
- Join Date
- Aug 2008
- Location
- Pothole County, PA
- Posts
- 2,258
- Blog Entries
- 2
Thanked: 522Sounds like it would have been better if the stone would have cracked all the way into two pieces so you could epoxy both halves and then lightly clamp it back together to form one unbroken stone.
Jerry
____JERRY
OOOPS! Pass the styptic please.
-
12-18-2011, 01:03 PM #17