Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree3Likes

Thread: What hone to start with

  1. #1
    Junior Member Cannis's Avatar
    Join Date
    Jan 2012
    Location
    Chicago
    Posts
    13
    Thanked: 0

    Default What hone to start with

    I want to start keeping my razors in shave ready shape. What hone should I buy first ?

  2. #2
    Senior Member
    Join Date
    Feb 2011
    Location
    Austin, Texas
    Posts
    280
    Thanked: 39

    Default

    Kind of depends on how much money you want to spend and how much your razors need to be honed. Check out the wiki.

    Short story: Norton 4k / 8k combo stone is a great deal. Then you can finish with chromium oxide on balsa or a strop.
    jeness and cpcohen1945 like this.

  3. #3
    Senior Member mjhammer's Avatar
    Join Date
    Apr 2011
    Location
    Wheat Ridge, Colorado
    Posts
    1,330
    Thanked: 262

    Default

    +1 Min, right on the money. You can get a cheap barbers hone for maintenance, but the 4/8k combo stone is great for not only maintenance, but for overall honing as well.

    You will find the 8k side will keep an edge in excellent shave, but if it gets too bad, a couple of passes on the 4k will refresh it, then polish it up on the 8k side, and use the CrOx paddles, or Diamond paddles to polish the edge even further for a more comfortable shave. You can get a CrOx paddle strop very cheaply, or a diamond paddles strop as well. Used together they can keep an edge polished for a very long time before your razor requires re-honing.

    Hope this helps!!

    M
    ​-- Any day I get out of bed, and the first thing out of my mouth is not a groan, that's going to be a good day --

  4. #4
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    if your blades are shave ready now, get a finishing hone, 12k or 16k synthetic, or a barber's hone.
    When the razor needs a touch up, do a few light strokes strop and if everything is done correctly you should be able to keep your razors in good shaving condition for a long time.
    Stefan

  5. #5
    Junior Member Cannis's Avatar
    Join Date
    Jan 2012
    Location
    Chicago
    Posts
    13
    Thanked: 0

    Default

    You guy make it sound easy. Is it really ?

  6. #6
    Senior Member mjhammer's Avatar
    Join Date
    Apr 2011
    Location
    Wheat Ridge, Colorado
    Posts
    1,330
    Thanked: 262

    Default

    Hi Cannis, yes it is pretty easy. You don't need a lot of equipment just to keep a razor sharp. If you have a professionally sharpened razor it is relatively simple to keep it sharp. Read up on some of the Wiki's for honing information and how to make strokes on a barbers hone, which is what I suggest you get for a previously sharpened razor.

    Getting to strop consistently will keep a razor sharp for a very long time without any honing help. A good strop is essential.

    A good barber hone, like a swaty or an anchor or 1 of many brands made back in the day will help re-shape a dulling razors edge with very little effort, say 5 or 6 laps only to refine the edge back to good shave-able condition. again, stropping is essential, canvas and leather, felt and leather, etc..

    A Norton 4/8k combo stone can be used to re-hone a razor completely by resetting the bevel and then polishing. A good finishing stone (like any good synthetic, or a cheap Chinese Guanxi (sp?) hone will put an additional polish on an edge, which I think makes the shave a little gentler or smoother. Again, this is all personal opinion, and YMMV, as what works for me, may or may not, work for you. I have to quantify all statements with that as there are always more than one way to do things.

    If you want more info on razor maintenance, read up in the Wiki's here. There is an amazing lot of information in there.

    Also, barbers hones are easy to come by, as are diamond paddles and CrOx paddles for polishing and refreshing a razor. If you want recommendations of where to buy, just ask.

    If you have any specific questions, please feel free to ask as I and a ton of others here will be glad to provide whatever information possible.

    Good luck, and have FUN!! that is the bottom line.

    Mike
    ​-- Any day I get out of bed, and the first thing out of my mouth is not a groan, that's going to be a good day --

  7. #7
    Senior Member tekbow's Avatar
    Join Date
    Mar 2011
    Location
    Leith, Edinburgh
    Posts
    821
    Thanked: 95

    Default

    I'd start with a Naniwa 12k. Serves the purpose a barbers hone serves and also as a finishing stone once you start doing more extensive honing work. Also will allow you to get the hang of honing strokes without causing too much hone wear to any of your blades. Once you go past that and want to say, bring back a chipped or out of service blade, you'll have your honing strokes down and be ready for a 4k/8k.

    When this happens put your 12k away until you can get a good shaving edge with the 8k. The reason i say this is that, in the case of restoring an edge (Bevel reset through to polishing) you won't get any benefit out of the 12k until you learned to do all you can with the 8k. I wish to god i'd done this when i started out honing, would have saves a lot of confusion. I jumped straight in with all of them, full set of nortons + a 12k Nani and was doggy paddling for about 6 weeks. No need to rush, a little learned at a time is a foundation skill learned well.
    Last edited by tekbow; 02-13-2012 at 08:37 AM.
    mjhammer likes this.

  8. #8
    Senior Member
    Join Date
    Mar 2010
    Location
    Boise, Idaho
    Posts
    334
    Thanked: 57

    Default

    I concur that the standard should be a Norton 4/8K and a Naniwa 12K. With these 2 stones, you can do anything short of restoration. Yes you'll have to lap them. I used wet/dry 300 grit sandpaper on the backside of a glass mirror. Wet everything and go easy with the lapping. That Nani 12K will give you a s-m-o-o-o-t-h edge!

  9. #9
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,595
    Thanked: 3747

    Default

    Quote Originally Posted by Blberger View Post
    Is there a discussion thread, wiki or other resource for step by step procedure on the first lapping with sandpaper on glass mirror?
    Yup.
    Hone Lapping 101 - Straight Razor Place Wiki

  10. The Following User Says Thank You to onimaru55 For This Useful Post:

    Blberger (05-14-2012)

  11. #10
    Bazinga Neolithium's Avatar
    Join Date
    Apr 2012
    Location
    Edmonton, Alberta
    Posts
    57
    Thanked: 2

    Default

    Quote Originally Posted by onimaru55 View Post
    This is exactly the method I use with my hone since my favourite vendor doesn't have a DMT stone in yet for me to buy. OP - The weight of the hone is enough, I just did some figure-8's with no pressure and it came out beautifully flat after about 15-20 seconds.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •