Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Sep 2011
    Location
    Scotland
    Posts
    7
    Thanked: 0

    Default First time honing

    Well, having had my razor for many months now, since September I think it is getting to the point where it needs the edge touched up. Last few times I shaved I actually used my safety razor that I hadn't used since buying the cutthroat one but it just didn't seem to be cutting that well and I don't think it was down to my technique, stropping or lather. It has been several months and it hasn't been honed at all and I doubt my stropping technique is perfect since I only started recently.
    Does this seem likely?

    Anyway, I'm wanting to give it a shot at touching up the edge myself. I've got a 12K waterstone that I bought on ebay a while ago and some sandpaper (Wet n Dry of the grit that was recommended on the wiki here for lapping, I understand that lapping has to be done the first time I use the stone.
    Should this stone be all I need to touch up the edge from a few months use. I'd say averaging once, twice at the absolute most, a week. Or am I likely to need another one?

    The other thing I was wondering is if there is anyone located in Scotland or the UK I suppose who does honing of a razor that I could send it to if I need someone to fix it for me?

  2. #2
    Senior Member blabbermouth Kees's Avatar
    Join Date
    Jun 2006
    Location
    The Netherlands
    Posts
    5,474
    Thanked: 656

    Default

    I would lap a new hone before using it. Most aren't sold as flat as they might be. Provided you did not damage the edge a 12K suffices.
    Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.

  3. #3
    Baby Butt Smooth... justalex's Avatar
    Join Date
    Jul 2010
    Location
    scotland
    Posts
    389
    Thanked: 61

    Default

    Hi Samwise, I'm in Glasgow. If you do have any problems I could fix the razor for you as long as it isn't a wedge or half wedge - all my razors are hollows - personally I would send Gary Haywood a pm if you do have any troubles, great guy and has far more expertise than myself.

    But as long as you take it slow and only apply as much pressure to keep the spine and edge flat on the stone - too much pressure and you'll mess up the bevel - you should be fine.

    regards Alex

  4. #4
    Junior Member
    Join Date
    Sep 2011
    Location
    Scotland
    Posts
    7
    Thanked: 0

    Default

    Thanks for the replies guys
    Just good to know that the hone I'm going to use should be sufficient and also that there are people fairly locally who can fix it if it all goes wrong

    Thanks justalex, I shall give him a PM if I need to (hopefully I won't)

  5. #5
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,770
    Thanked: 5017
    Blog Entries
    4

    Default

    You didn't say what hone you have, that will make a difference. Also you didn't say what razor you have. If it's an Eboy special go ahead and play with it but if it is a pricier piece or a new razor I wouldn't use it to play with. Also if the razor has deteriorated to the point it isn't shaving good at all you might very well be beyond a touchup and may need some more serious honing.
    No matter how many men you kill you can't kill your successor-Emperor Nero

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •