Printable View
The title says it all.
When I bought it, it was in a wooden box and VERY dished out.
I removed it from the box, and lapped the bottom to make it useable.
I lapped it down with a DMT325 just to get it flat.
Have a look at the pics, and if you have any thoughts please let me know.
Thanks!
Attachment 122937Attachment 122938Attachment 122939Attachment 122940Attachment 122941Attachment 122942Attachment 122943
NO idea but i'm testing it tomorrow :)
What are the measurements?
It measures
7 7/8 Inches long.
2 Inch wide
15/32 thick with a caliper.
Don't know but I have a "Pike" barber hone that looks just like it only smaller.
Is it porous? It reminds me a bit of a DB without the characteristic pattern.
It's kinda hard to tell what color slurry is in pics. So what would call the color?
Did you soak the stone before lapping? If so did you notice if it released any oil or not?
How hard was it lap?
It was fairly flat when I started lapping it.
It took about 10 mins on my bench sander with an 80 grit belt.
Then another 10-15 on my DMT 325 to finish it off.
Looks like it has shiny things in it, and it sparked a little bit on the bench sander????
I will now defer all testing to Brooksie....he has my rock now, and knows how to use naturals
a lot better than I do.
I would not be surprised if it is a man made hone.
Wouldn't a man made stone be a more consistant color?
Was the color the same dry, then change when adding water? I ask this because I have a un-named synthetic barber hone close to the same coloring, hard as nails, and works pretty well. I lapped and finished it to 1K on wet/dry sandpaper & it was worth it. Almost as good a touch-up stone as my 16K as far as speed and somewhere around the 10-12K range if you use lather.
After the testing, please give a "grit" range like: bevel setter, pre-polisher, polisher, finisher
I haven't put it to it's paces yet but I did take a shave ready razor and did about 30 laps on this thing with just water, then stropped the blade. Passed the HHT no problem. I just had surgery on my nose so I won't be able to shave for a few days but will absolutely report back on the results.
I'd let you know if the smell was of a natural or not but I can't smell or taste anything right now....
Despite our initial examination and thought that it was a natural stone, I'm thinking that even with the lack of uniformity of colour that the stone is most likely man made. The consistency and composition of this stone does look more like a barber hone to me and feels very similar to my barber hones.
Interesting!
I can't wait to hear more about it!
Sorry for the delay in getting around to this. Shaved off of the barber hone this morning and wanted to share my experience.
I took a shave ready wade and butcher extra hollow ground razor that I had finished on my green thuringian. I did 10 laps or so with just water and 10 with lather (made from soap). I then did my usual stropping which is comprised of 50 laps on just leather.
The shave went well, definitely a capable hone that would be great for travel purposes. I'd put it around the 10k mark IMHO. I've shaved with many naniwa 12k edges from Ironsidegnr and felt that this razor wasn't as keep as that. It also wasn't as keen or smooth as when the razor was finished on thuringian.
All said and done, definitely a capable hone that would be easy to pack to maintain a razor while on vacation from your normal honing supplies but not something I would go to instead of the normal finishers of choice.
