Has anyone tried these??
I am looking to invest in a good setof hones and was curious about them.
Printable View
Has anyone tried these??
I am looking to invest in a good setof hones and was curious about them.
Don't have any but from what I hear from friends that do they are great for lapping waterstones. I don't think I'd want to hone a razor on them. As great as they are be aware that the Dia-Sharp DMT D8C, the usual lapping plate for many of us, is way cheaper. FWIW, I have the D8C but the Atoma 1200 is on my to do list if I can ever bring myself to part with the $.
Same here, would be fun to try an Atoma, but my DMTs looks like they going to last a few years more.
Search on site for Atoma, lot written about them.
Like Jimmy said - fantastic for lapping, but not for honing on.
The kind of random pattern of the diamond grit stops them sticking as much as DMTs during lapping, and they are very, very quick too. Very expensive, though, and you can get equally good results lapping on glass with lapidary grit with some care at a fraction of the cost.
Regards,
Neil
Was going to order some more "lose grit" but at 50 Kg a bucket it was a little more than I needed.Quote:
Originally Posted by Neil Miller
My old supplier shut down. :(
As have been said, great for lapping, but not useful at all for honing razors.
I have the 140, 600 and 1200 grit, all of them stellar products.
I also have the 325, 600 and 1200 grit DMT plates in 8 by 3 inches, they are not as good for lapping imho, but slightly better for rough work on steel. Personally, i wouldn't use any of those either on any razor though.
Bringing up an older thread, but i've heard alot of guys using the 1200 for setting bevels & the 800 for chip removal.
Is there something better?
Atoma do not have 800 grit IFAIK, the 1.2k not good for repairs.Quote:
Originally Posted by JGKC9AYC
I use synthetics for any repairs, but if one does not want to invest in 400-600 grit synthetic the 325 DMT will work well enough.
Any particular synthetic for repairs, brand-wise?Quote:
Originally Posted by mainaman
Is the 1.2k no good for setting bevels or is there something better & cheaper?
Thanks.
It will work but the way it is made it is better working for lapping purposes.Quote:
Originally Posted by JGKC9AYC
For repairs, you can get, 400/600 Naniwa Chosera, I like 400 Sigma Power. For most cases 1k Naniwa Chosera works great for me.
I've used the Atoma 1.2K for bevel setting for the past several years. I haven't noticed any untoward effects yet compared to any of my other lower grit hones.
James.